[PATCH v3] dt-bindings: media: adv748x: Document re-mappable addresses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The ADV748x supports configurable slave addresses for its I2C pages.
Document the page names, and provide an example for setting each of the
pages explicitly.

Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>

---
v2:
 - Fix commit message
 - Extend documentation for the "required property" reg:

v3
 - Fix missing comment from Laurent.
 - correct the reg descrption
---
 .../devicetree/bindings/media/i2c/adv748x.txt    | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
index 21ffb5ed8183..25a02496f4ba 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
@@ -10,7 +10,11 @@ Required Properties:
     - "adi,adv7481" for the ADV7481
     - "adi,adv7482" for the ADV7482
 
-  - reg: I2C slave address
+  - reg: I2C slave addresses
+    The ADV748x has up to twelve 256-byte maps that can be accessed via the
+    main I2C ports. Each map has it own I2C address and acts as a standard
+    slave device on the I2C bus. The main address is mandatory, others are
+    optional and remain at default values if not specified.
 
 Optional Properties:
 
@@ -18,6 +22,11 @@ Optional Properties:
 		     "intrq3". All interrupts are optional. The "intrq3" interrupt
 		     is only available on the adv7481
   - interrupts: Specify the interrupt lines for the ADV748x
+  - reg-names : Names of maps with programmable addresses.
+		It shall contain all maps needing a non-default address.
+		Possible map names are:
+		  "main", "dpll", "cp", "hdmi", "edid", "repeater",
+		  "infoframe", "cbus", "cec", "sdp", "txa", "txb"
 
 The device node must contain one 'port' child node per device input and output
 port, in accordance with the video interface bindings defined in
@@ -47,7 +56,10 @@ Example:
 
 	video-receiver@70 {
 		compatible = "adi,adv7482";
-		reg = <0x70>;
+		reg = <0x70 0x71 0x72 0x73 0x74 0x75
+		       0x60 0x61 0x62 0x63 0x64 0x65>;
+		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+			    "infoframe", "cbus", "cec", "sdp", "txa", "txb";
 
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.17.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux