Hi Kieran,
Thanks for your patch.
On 2018-08-09 20:29:44 +0100, Kieran Bingham wrote:
> The ADV748x supports configurable slave addresses for its I2C pages.
> Document the page names, and provide an example for setting each of the
> pages explicitly.
>
> Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
>
> ---
> v2:
> - Fix commit message
> - Extend documentation for the "required property" reg:
>
> v3
> - Fix missing comment from Laurent.
> - correct the reg descrption
> ---
> .../devicetree/bindings/media/i2c/adv748x.txt | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> index 21ffb5ed8183..25a02496f4ba 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> @@ -10,7 +10,11 @@ Required Properties:
> - "adi,adv7481" for the ADV7481
> - "adi,adv7482" for the ADV7482
>
> - - reg: I2C slave address
> + - reg: I2C slave addresses
> + The ADV748x has up to twelve 256-byte maps that can be accessed via the
> + main I2C ports. Each map has it own I2C address and acts as a standard
> + slave device on the I2C bus. The main address is mandatory, others are
> + optional and remain at default values if not specified.
>
> Optional Properties:
>
> @@ -18,6 +22,11 @@ Optional Properties:
> "intrq3". All interrupts are optional. The "intrq3" interrupt
> is only available on the adv7481
> - interrupts: Specify the interrupt lines for the ADV748x
> + - reg-names : Names of maps with programmable addresses.
> + It shall contain all maps needing a non-default address.
> + Possible map names are:
> + "main", "dpll", "cp", "hdmi", "edid", "repeater",
> + "infoframe", "cbus", "cec", "sdp", "txa", "txb"
>
> The device node must contain one 'port' child node per device input and output
> port, in accordance with the video interface bindings defined in
> @@ -47,7 +56,10 @@ Example:
>
> video-receiver@70 {
> compatible = "adi,adv7482";
> - reg = <0x70>;
> + reg = <0x70 0x71 0x72 0x73 0x74 0x75
> + 0x60 0x61 0x62 0x63 0x64 0x65>;
> + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
> + "infoframe", "cbus", "cec", "sdp", "txa", "txb";
>
> #address-cells = <1>;
> #size-cells = <0>;
> --
> 2.17.1
>
--
Regards,
Niklas Söderlund
