This patchset introduces support for the USB ports (both USB2 and USB3) on the Allwinner H6 SoC. This revision adds the USB2 support, and places it before the USB3 support. So only the USB3 part will have changelog in this revision. The first 5 PATCHes are the USB2 part, and the latter 4 PATCHes are the USB3 part. PATCH 1, 2, 6, 7 should go through the PHY tree, and the remaining patches should go through the armsoc tree via sunxi tree. Icenowy Zheng (9): phy: sun4i-usb: add support for missing USB PHY index phy: sun4i-usb: add support for H6 USB2 PHY arm64: allwinner: dts: h6: add USB2-related device nodes arm64: allwinner: dts: h6: add USB Vbus regulator arm64: allwinner: dts: h6: enable USB2 on Pine H64 dt-bindings: phy: add binding for Allwinner USB3 PHY phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC arm64: allwinner: dts: h6: add USB3 device nodes arm64: allwinner: dts: h6: enable USB3 port on Pine H64 .../bindings/phy/sun50i-usb3-phy.txt | 24 +++ .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 46 +++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 113 ++++++++++ drivers/phy/allwinner/Kconfig | 13 ++ drivers/phy/allwinner/Makefile | 1 + drivers/phy/allwinner/phy-sun4i-usb.c | 26 ++- drivers/phy/allwinner/phy-sun50i-usb3.c | 194 ++++++++++++++++++ 7 files changed, 415 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt create mode 100644 drivers/phy/allwinner/phy-sun50i-usb3.c -- 2.18.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
