Pine H64 board have a USB3 port, which is connected to the USB3 pins of the H6 SoC, and the 5V power supply is controlled via GPIO (shared with the power USB ports). Enable this port. Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx> --- Changes in v3: - Added Chen-Yu's Review tag. arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 97016a848d5b..05a78d43e17c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -51,6 +51,10 @@ }; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -220,3 +224,8 @@ usb3_vbus-supply = <®_usb_vbus>; status = "okay"; }; + +&usb3phy { + phy-supply = <®_usb_vbus>; + status = "okay"; +}; -- 2.18.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html