Re: [PATCH v2 0/3] mtd: rawnand: denali: add new clocks and improve setup_data_interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Boris,

2018-06-14 16:38 GMT+09:00 Boris Brezillon <boris.brezillon@xxxxxxxxxxx>:
> On Thu, 14 Jun 2018 16:29:59 +0900
> Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> wrote:
>
>> Hi Richard,
>>
>> 2018-06-14 16:25 GMT+09:00 Richard Weinberger <richard@xxxxxxxxxxxxx>:
>> > Masahiro,
>> >
>> > Am Donnerstag, 14. Juni 2018, 07:11:04 CEST schrieb Masahiro Yamada:
>> >>
>> >> The ->setup_data_interface() hook needs to know the clock frequency.
>> >> In fact, this IP needs three clocks, bus "which clock?" is really
>> >> confusing.  (It is not described in the DT-binding at all.)
>> >>
>> >> This series adds more clocks.  In the new binding, three clocks
>> >> are required: core clock, bus interface clock, ECC engine clock.
>> >>
>> >> This series also takes care of the backward compatibility by
>> >> providing hardcoded values in case the new clocks are missing.
>> >> So, existing DT should work.
>> >>
>> >>
>> >> Changes in v2:
>> >>   - Split patches into sensible chunks
>> >>
>> >> Masahiro Yamada (3):
>> >>   mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev
>> >>   mtd: rawnand: denali_dt: add more clocks based on IP datasheet
>> >>   mtd: rawnand: denali: optimize timing parameters for data interface
>> >
>> > This still means that we need to feed at least 2/3 and 3/3 into -stable to
>> > unbreak the driver.
>>
>>
>> 3/3 is not mandatory.
>>
>> You can only back-port 1/3 and 2/3.
>
> Well, patch 1 is not a fix, can we move it after patch 2 so that only
> patch 2 is flagged with the Fixes+Cc-stable tags?


OK, will do that.

If you try to port this back to v4.14.*
you need to fix-up the file path
since the driver did not reside in the raw/ sub-directory at that time.


Except that, I do not see backport issue.




> Thanks,
>
> Boris
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/



-- 
Best Regards
Masahiro Yamada
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux