Hi Richard, 2018-06-14 16:25 GMT+09:00 Richard Weinberger <richard@xxxxxxxxxxxxx>: > Masahiro, > > Am Donnerstag, 14. Juni 2018, 07:11:04 CEST schrieb Masahiro Yamada: >> >> The ->setup_data_interface() hook needs to know the clock frequency. >> In fact, this IP needs three clocks, bus "which clock?" is really >> confusing. (It is not described in the DT-binding at all.) >> >> This series adds more clocks. In the new binding, three clocks >> are required: core clock, bus interface clock, ECC engine clock. >> >> This series also takes care of the backward compatibility by >> providing hardcoded values in case the new clocks are missing. >> So, existing DT should work. >> >> >> Changes in v2: >> - Split patches into sensible chunks >> >> Masahiro Yamada (3): >> mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev >> mtd: rawnand: denali_dt: add more clocks based on IP datasheet >> mtd: rawnand: denali: optimize timing parameters for data interface > > This still means that we need to feed at least 2/3 and 3/3 into -stable to > unbreak the driver. 3/3 is not mandatory. You can only back-port 1/3 and 2/3. 3/3 is an optimization. It will make the device access a little faster, but you do not have to take it if you do not want to. > I'd really prefer a single self-hosting fix that can go into -stable and then > patches on top of the fix can prettify the driver. > > Thanks, > //richard > > -- > sigma star gmbh - Eduard-Bodem-Gasse 6 - 6020 Innsbruck - Austria > ATU66964118 - FN 374287y > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Best Regards Masahiro Yamada -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
