On Wed, Jun 13, 2018 at 10:09:58AM +0000, Hugues FRUCHET wrote: > Hi Sakari, Rob, > > Find a new proposal below: > > On 06/13/2018 10:24 AM, Sakari Ailus wrote: > > On Wed, Jun 13, 2018 at 08:10:02AM +0000, Hugues FRUCHET wrote: > >> Hi Rob, thanks for review, > >> > >> On 06/13/2018 12:06 AM, Rob Herring wrote: > >>> On Mon, Jun 11, 2018 at 11:29:17AM +0200, Hugues Fruchet wrote: > >>>> Add support of module being physically mounted upside down. > >>>> In this case, mirror and flip are enabled to fix captured images > >>>> orientation. > >>>> > >>>> Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx> > >>>> --- > >>>> .../devicetree/bindings/media/i2c/ov5640.txt | 3 +++ > >>> > >>> Please split bindings to separate patches. > >> > >> OK, will do in next patchset. > >> > >>> > >>>> drivers/media/i2c/ov5640.c | 28 ++++++++++++++++++++-- > >>>> 2 files changed, 29 insertions(+), 2 deletions(-) > >>>> > >>>> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt b/Documentation/devicetree/bindings/media/i2c/ov5640.txt > >>>> index 8e36da0..f76eb7e 100644 > >>>> --- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt > >>>> +++ b/Documentation/devicetree/bindings/media/i2c/ov5640.txt > >>>> @@ -13,6 +13,8 @@ Optional Properties: > >>>> This is an active low signal to the OV5640. > >>>> - powerdown-gpios: reference to the GPIO connected to the powerdown pin, > >>>> if any. This is an active high signal to the OV5640. > >>>> +- rotation: integer property; valid values are 0 (sensor mounted upright) > >>>> + and 180 (sensor mounted upside down). > >>> > >>> Didn't we just add this as a common property? If so, just reference the > >>> common definition. If not, it needs a common definition. > >>> > >> > >> A common definition has been introduced by Sakari, I'm reusing it, see: > >> https://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg132517.html > >> > >> I would so propose: > >> >> +- rotation: as defined in > >> >> + Documentation/devicetree/bindings/media/video-interfaces.txt. > > > > Shouldn't the description still include the valid values? As far as I can > > tell, these are ultimately device specific albeit more or less the same for > > *this kind* of sensors. > > Yes you're right, let's put both together: > +- rotation: as defined in > + Documentation/devicetree/bindings/media/video-interfaces.txt, > + valid values are 0 (sensor mounted upright) and 180 (sensor > + mounted upside down). I'll improve the description for smiapp as well. -- Sakari Ailus e-mail: sakari.ailus@xxxxxx -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
