Hi Mark,
Rob ACKed DT bindings, Rafael ACKed export of pm_power_off_prepare. I
need your OK for regulator patch.
On 17.05.2018 07:50, Oleksij Rempel wrote:
> On some boards the SoC can use one pin "PMIC_STBY_REQ" to notify th PMIC
> about state changes. In this case internal state of PMIC must be
> preconfigured for upcomming state change.
> It works fine with the current regulator framework, except with the
> power-off case.
>
> This patch is providing an optional pm_power_off_prepare handler
> which will configure standby state of the PMIC to disable all power lines.
>
> In my power consumption test on RIoTBoard, I got the following results:
> power off without this patch: 320 mA
> power off with this patch: 2 mA
> suspend to ram: 40 mA
>
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
> drivers/regulator/pfuze100-regulator.c | 92 ++++++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
>
> diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
> index 63922a2167e5..f6c276ed91d8 100644
> --- a/drivers/regulator/pfuze100-regulator.c
> +++ b/drivers/regulator/pfuze100-regulator.c
> @@ -28,6 +28,7 @@
> #include <linux/regulator/pfuze100.h>
> #include <linux/i2c.h>
> #include <linux/slab.h>
> +#include <linux/kallsyms.h>
> #include <linux/regmap.h>
>
> #define PFUZE_NUMREGS 128
> @@ -42,11 +43,17 @@
>
> #define PFUZE100_COINVOL 0x1a
> #define PFUZE100_SW1ABVOL 0x20
> +#define PFUZE100_SW1ABMODE 0x23
> #define PFUZE100_SW1CVOL 0x2e
> +#define PFUZE100_SW1CMODE 0x31
> #define PFUZE100_SW2VOL 0x35
> +#define PFUZE100_SW2MODE 0x38
> #define PFUZE100_SW3AVOL 0x3c
> +#define PFUZE100_SW3AMODE 0x3f
> #define PFUZE100_SW3BVOL 0x43
> +#define PFUZE100_SW3BMODE 0x46
> #define PFUZE100_SW4VOL 0x4a
> +#define PFUZE100_SW4MODE 0x4d
> #define PFUZE100_SWBSTCON1 0x66
> #define PFUZE100_VREFDDRCON 0x6a
> #define PFUZE100_VSNVSVOL 0x6b
> @@ -57,6 +64,13 @@
> #define PFUZE100_VGEN5VOL 0x70
> #define PFUZE100_VGEN6VOL 0x71
>
> +#define PFUZE100_SWxMODE_MASK 0xf
> +#define PFUZE100_SWxMODE_APS_APS 0x8
> +#define PFUZE100_SWxMODE_APS_OFF 0x4
> +
> +#define PFUZE100_VGENxLPWR BIT(6)
> +#define PFUZE100_VGENxSTBY BIT(5)
> +
> enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 };
>
> struct pfuze_regulator {
> @@ -489,6 +503,69 @@ static inline struct device_node *match_of_node(int index)
> }
> #endif
>
> +static struct pfuze_chip *syspm_pfuze_chip;
> +
> +static void pfuze_power_off_prepare(void)
> +{
> + dev_info(syspm_pfuze_chip->dev, "Configure standy mode for power off");
> +
> + /* Switch from default mode: APS/APS to APS/Off */
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1ABMODE,
> + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1CMODE,
> + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW2MODE,
> + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3AMODE,
> + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3BMODE,
> + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW4MODE,
> + PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
> +
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN1VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN2VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN3VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN4VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN5VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN6VOL,
> + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
> + PFUZE100_VGENxSTBY);
> +}
> +
> +static int pfuze_power_off_prepare_init(struct pfuze_chip *pfuze_chip)
> +{
> + if (pfuze_chip->chip_id != PFUZE100) {
> + dev_warn(pfuze_chip->dev, "Requested pm_power_off_prepare handler for not supported chip\n");
> + return -ENODEV;
> + }
> +
> + if (pm_power_off_prepare) {
> + dev_warn(pfuze_chip->dev, "pm_power_off_prepare is already registered.\n");
> + return -EBUSY;
> + }
> +
> + if (syspm_pfuze_chip) {
> + dev_warn(pfuze_chip->dev, "syspm_pfuze_chip is already set.\n");
> + return -EBUSY;
> + }
> +
> + syspm_pfuze_chip = pfuze_chip;
> + pm_power_off_prepare = pfuze_power_off_prepare;
> +
> + return 0;
> +}
> +
> static int pfuze_identify(struct pfuze_chip *pfuze_chip)
> {
> unsigned int value;
> @@ -659,6 +736,20 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
> }
> }
>
> + if (of_property_read_bool(client->dev.of_node,
> + "fsl,pmic-stby-poweroff"))
> + return pfuze_power_off_prepare_init(pfuze_chip);
> +
> + return 0;
> +}
> +
> +static int pfuze100_regulator_remove(struct i2c_client *client)
> +{
> + if (syspm_pfuze_chip) {
> + syspm_pfuze_chip = NULL;
> + pm_power_off_prepare = NULL;
> + }
> +
> return 0;
> }
>
> @@ -669,6 +760,7 @@ static struct i2c_driver pfuze_driver = {
> .of_match_table = pfuze_dt_ids,
> },
> .probe = pfuze100_regulator_probe,
> + .remove = pfuze100_regulator_remove,
> };
> module_i2c_driver(pfuze_driver);
>
>
Attachment:
signature.asc
Description: OpenPGP digital signature
