Document the new optional "fsl,pmic-stby-poweroff" property. Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- Documentation/devicetree/bindings/regulator/pfuze100.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt index c6dd3f5e485b..91fec1a0785d 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt @@ -4,6 +4,13 @@ Required properties: - compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000" - reg: I2C slave address +Optional properties: +- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all + power rails when PMIC_STBY_REQ line is asserted during the power off sequence. + Use this option if the SoC should be powered off by external power + management IC (PMIC) on PMIC_STBY_REQ signal. + As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal. + Required child node: - regulators: This is the list of child nodes that specify the regulator initialization data for defined regulators. Please refer to below doc -- 2.17.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
