Hi Rob, thanks for review, On 06/13/2018 12:06 AM, Rob Herring wrote: > On Mon, Jun 11, 2018 at 11:29:17AM +0200, Hugues Fruchet wrote: >> Add support of module being physically mounted upside down. >> In this case, mirror and flip are enabled to fix captured images >> orientation. >> >> Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx> >> --- >> .../devicetree/bindings/media/i2c/ov5640.txt | 3 +++ > > Please split bindings to separate patches. OK, will do in next patchset. > >> drivers/media/i2c/ov5640.c | 28 ++++++++++++++++++++-- >> 2 files changed, 29 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt b/Documentation/devicetree/bindings/media/i2c/ov5640.txt >> index 8e36da0..f76eb7e 100644 >> --- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt >> +++ b/Documentation/devicetree/bindings/media/i2c/ov5640.txt >> @@ -13,6 +13,8 @@ Optional Properties: >> This is an active low signal to the OV5640. >> - powerdown-gpios: reference to the GPIO connected to the powerdown pin, >> if any. This is an active high signal to the OV5640. >> +- rotation: integer property; valid values are 0 (sensor mounted upright) >> + and 180 (sensor mounted upside down). > > Didn't we just add this as a common property? If so, just reference the > common definition. If not, it needs a common definition. > A common definition has been introduced by Sakari, I'm reusing it, see: https://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg132517.html I would so propose: >> +- rotation: as defined in >> + Documentation/devicetree/bindings/media/video-interfaces.txt. Best regards, Hugues.��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
