Re: [PATCH] arm64: dts: stingray: move common board components to stingray-board-base

[Scott Branden <scott.branden@xxxxxxxxxxxx>]

Hi Florian,


On 18-06-04 02:09 PM, Florian Fainelli wrote:
> On 05/22/2018 11:55 AM, Scott Branden wrote:
> > Move common board components from base bcm958742 dtsi file to new
> > stingray-board-base dtsi file so they can be shared between many stingray
> > boards following common design.
> >
> > Signed-off-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
>
> Applied to devicetree-arm64/next, though this did not apply cleanly,
> please check the results at:
>
> https://github.com/Broadcom/stblinux/commit/0b2cf5a855cd235fa95fbdfedfc524a97a71a7fe
It's looks fine.
> > ---
> >   .../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 35 +--------------
> >   .../dts/broadcom/stingray/stingray-board-base.dtsi | 51 ++++++++++++++++++++++
> >   2 files changed, 52 insertions(+), 34 deletions(-)
> >   create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
> > index cacc25e..d74f6df 100644
> > --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
> > +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
> > @@ -30,20 +30,9 @@
> >    *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> >    */
> >   
> > -#include "stingray.dtsi"
> > +#include "stingray-board-base.dtsi"
> >   
> >   / {
> > -	chosen {
> > -		stdout-path = "serial0:115200n8";
> > -	};
> > -
> > -	aliases {
> > -		serial0 = &uart1;
> > -		serial1 = &uart0;
> > -		serial2 = &uart2;
> > -		serial3 = &uart3;
> > -	};
> > -
> >   	sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
> >   		compatible = "regulator-gpio";
> >   		regulator-name = "sdio0_vddo_ctrl_reg";
> > @@ -67,23 +56,6 @@
> >   	};
> >   };
> >   
> > -&memory { /* Default DRAM banks */
> > -	reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
> > -	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
> > -};
> > -
> > -&mdio_mux_iproc {
> > -	mdio@10 {
> > -		gphy0: eth-phy@10 {
> > -			reg = <0x10>;
> > -		};
> > -	};
> > -};
> > -
> > -&uart1 {
> > -	status = "okay";
> > -};
> > -
> >   &pwm {
> >   	status = "okay";
> >   };
> > @@ -111,8 +83,6 @@
> >   };
> >   
> >   &enet {
> > -	phy-mode = "rgmii-id";
> > -	phy-handle = <&gphy0>;
> >   	status = "okay";
> >   };
> >   
> > @@ -133,13 +103,10 @@
> >   
> >   &sdio0 {
> >   	vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
> > -	non-removable;
> > -	full-pwr-cycle;
> >   	status = "okay";
> >   };
> >   
> >   &sdio1 {
> >   	vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
> > -	full-pwr-cycle;
> >   	status = "okay";
> >   };
> > diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
> > new file mode 100644
> > index 0000000..82a2471
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
> > @@ -0,0 +1,51 @@
> > +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
> > +/*
> > + *  Copyright(c) 2016-2018 Broadcom
> > + */
> > +
> > +#include "stingray.dtsi"
> > +#include <dt-bindings/gpio/gpio.h>
> > +
> > +/ {
> > +	aliases {
> > +		serial0 = &uart1;
> > +		serial1 = &uart0;
> > +		serial2 = &uart2;
> > +		serial3 = &uart3;
> > +	};
> > +
> > +	chosen {
> > +		stdout-path = "serial0:115200n8";
> > +	};
> > +};
> > +
> > +&memory { /* Default DRAM banks */
> > +	reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
> > +	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
> > +};
> > +
> > +&enet {
> > +	phy-mode = "rgmii-id";
> > +	phy-handle = <&gphy0>;
> > +};
> > +
> > +&uart1 {
> > +	status = "okay";
> > +};
> > +
> > +&sdio0 {
> > +	non-removable;
> > +	full-pwr-cycle;
> > +};
> > +
> > +&sdio1 {
> > +	full-pwr-cycle;
> > +};
> > +
> > +&mdio_mux_iproc {
> > +	mdio@10 {
> > +		gphy0: eth-phy@10 {
> > +			reg = <0x10>;
> > +		};
> > +	};
> > +};

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html