On 05/22/2018 11:55 AM, Scott Branden wrote: > Move common board components from base bcm958742 dtsi file to new > stingray-board-base dtsi file so they can be shared between many stingray > boards following common design. > > Signed-off-by: Scott Branden <scott.branden@xxxxxxxxxxxx> Applied to devicetree-arm64/next, though this did not apply cleanly, please check the results at: https://github.com/Broadcom/stblinux/commit/0b2cf5a855cd235fa95fbdfedfc524a97a71a7fe > --- > .../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 35 +-------------- > .../dts/broadcom/stingray/stingray-board-base.dtsi | 51 ++++++++++++++++++++++ > 2 files changed, 52 insertions(+), 34 deletions(-) > create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi > > diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi > index cacc25e..d74f6df 100644 > --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi > +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi > @@ -30,20 +30,9 @@ > * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > */ > > -#include "stingray.dtsi" > +#include "stingray-board-base.dtsi" > > / { > - chosen { > - stdout-path = "serial0:115200n8"; > - }; > - > - aliases { > - serial0 = &uart1; > - serial1 = &uart0; > - serial2 = &uart2; > - serial3 = &uart3; > - }; > - > sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl { > compatible = "regulator-gpio"; > regulator-name = "sdio0_vddo_ctrl_reg"; > @@ -67,23 +56,6 @@ > }; > }; > > -&memory { /* Default DRAM banks */ > - reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ > - <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ > -}; > - > -&mdio_mux_iproc { > - mdio@10 { > - gphy0: eth-phy@10 { > - reg = <0x10>; > - }; > - }; > -}; > - > -&uart1 { > - status = "okay"; > -}; > - > &pwm { > status = "okay"; > }; > @@ -111,8 +83,6 @@ > }; > > &enet { > - phy-mode = "rgmii-id"; > - phy-handle = <&gphy0>; > status = "okay"; > }; > > @@ -133,13 +103,10 @@ > > &sdio0 { > vqmmc-supply = <&sdio0_vddo_ctrl_reg>; > - non-removable; > - full-pwr-cycle; > status = "okay"; > }; > > &sdio1 { > vqmmc-supply = <&sdio1_vddo_ctrl_reg>; > - full-pwr-cycle; > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi > new file mode 100644 > index 0000000..82a2471 > --- /dev/null > +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi > @@ -0,0 +1,51 @@ > +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) > +/* > + * Copyright(c) 2016-2018 Broadcom > + */ > + > +#include "stingray.dtsi" > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + aliases { > + serial0 = &uart1; > + serial1 = &uart0; > + serial2 = &uart2; > + serial3 = &uart3; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&memory { /* Default DRAM banks */ > + reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ > + <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ > +}; > + > +&enet { > + phy-mode = "rgmii-id"; > + phy-handle = <&gphy0>; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&sdio0 { > + non-removable; > + full-pwr-cycle; > +}; > + > +&sdio1 { > + full-pwr-cycle; > +}; > + > +&mdio_mux_iproc { > + mdio@10 { > + gphy0: eth-phy@10 { > + reg = <0x10>; > + }; > + }; > +}; > -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
