Re: [PATCH v9 2/7] i2c: Add FSI-attached I2C master algorithm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 06/04/2018 02:21 PM, Andy Shevchenko wrote:
On Mon, Jun 4, 2018 at 10:00 PM, Eddie James <eajames@xxxxxxxxxxxxxxxxxx> wrote:
Add register definitions for FSI-attached I2C master and functions to
access those registers over FSI. Add an FSI driver so that our I2C bus
is probed up during an FSI scan.

Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
---
  drivers/i2c/busses/Kconfig   |  11 ++
  drivers/i2c/busses/Makefile  |   1 +
  drivers/i2c/busses/i2c-fsi.c | 234 +++++++++++++++++++++++++++++++++++++++++++
  3 files changed, 246 insertions(+)
  create mode 100644 drivers/i2c/busses/i2c-fsi.c

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 4f8df2e..cddd159 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1330,4 +1330,15 @@ config I2C_ZX2967
           This driver can also be built as a module. If so, the module will be
           called i2c-zx2967.

+config I2C_FSI
+       tristate "FSI I2C driver"
+       depends on FSI
+       help
+         Driver for FSI bus attached I2C masters. These are I2C masters that
+         are connected to the system over an FSI bus, instead of the more
+         common PCI or MMIO interface.
+
+         This driver can also be built as a module. If so, the module will be
+         called as i2c-fsi.
+
  endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 5a86914..4909fd6 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -137,5 +137,6 @@ obj-$(CONFIG_I2C_PCA_ISA)   += i2c-pca-isa.o
  obj-$(CONFIG_I2C_SIBYTE)       += i2c-sibyte.o
  obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
  obj-$(CONFIG_SCx200_ACB)       += scx200_acb.o
+obj-$(CONFIG_I2C_FSI)          += i2c-fsi.o

  ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
new file mode 100644
index 0000000..e1b183c
--- /dev/null
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * FSI-attached I2C master algorithm
+ *
+ * Copyright 2018 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fsi.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#define FSI_ENGID_I2C          0x7
+
+#define I2C_DEFAULT_CLK_DIV    6
+
+/* i2c registers */
+#define I2C_FSI_FIFO           0x00
+#define I2C_FSI_CMD            0x04
+#define I2C_FSI_MODE           0x08
+#define I2C_FSI_WATER_MARK     0x0C
+#define I2C_FSI_INT_MASK       0x10
+#define I2C_FSI_INT_COND       0x14
+#define I2C_FSI_OR_INT_MASK    0x14
+#define I2C_FSI_INTS           0x18
+#define I2C_FSI_AND_INT_MASK   0x18
+#define I2C_FSI_STAT           0x1C
+#define I2C_FSI_RESET_I2C      0x1C
+#define I2C_FSI_ESTAT          0x20
+#define I2C_FSI_RESET_ERR      0x20
+#define I2C_FSI_RESID_LEN      0x24
+#define I2C_FSI_SET_SCL                0x24
+#define I2C_FSI_PORT_BUSY      0x28
+#define I2C_FSI_RESET_SCL      0x2C
+#define I2C_FSI_SET_SDA                0x30
+#define I2C_FSI_RESET_SDA      0x34
+
+/* cmd register */
+#define I2C_CMD_WITH_START     BIT(31)
+#define I2C_CMD_WITH_ADDR      BIT(30)
+#define I2C_CMD_RD_CONT                BIT(29)
+#define I2C_CMD_WITH_STOP      BIT(28)
+#define I2C_CMD_FORCELAUNCH    BIT(27)
+#define I2C_CMD_ADDR           GENMASK(23, 17)
+#define I2C_CMD_READ           BIT(16)
+#define I2C_CMD_LEN            GENMASK(15, 0)
+
+/* mode register */
+#define I2C_MODE_CLKDIV                GENMASK(31, 16)
+#define I2C_MODE_PORT          GENMASK(15, 10)
+#define I2C_MODE_ENHANCED      BIT(3)
+#define I2C_MODE_DIAG          BIT(2)
+#define I2C_MODE_PACE_ALLOW    BIT(1)
+#define I2C_MODE_WRAP          BIT(0)
+
+/* watermark register */
+#define I2C_WATERMARK_HI       GENMASK(15, 12)
+#define I2C_WATERMARK_LO       GENMASK(7, 4)
+
+#define I2C_FIFO_HI_LVL                4
+#define I2C_FIFO_LO_LVL                4
+
+/* interrupt register */
+#define I2C_INT_INV_CMD                BIT(15)
+#define I2C_INT_PARITY         BIT(14)
+#define I2C_INT_BE_OVERRUN     BIT(13)
+#define I2C_INT_BE_ACCESS      BIT(12)
+#define I2C_INT_LOST_ARB       BIT(11)
+#define I2C_INT_NACK           BIT(10)
+#define I2C_INT_DAT_REQ                BIT(9)
+#define I2C_INT_CMD_COMP       BIT(8)
+#define I2C_INT_STOP_ERR       BIT(7)
+#define I2C_INT_BUSY           BIT(6)
+#define I2C_INT_IDLE           BIT(5)
+
+#define I2C_INT_ENABLE         0x0000ff80
+#define I2C_INT_ERR            0x0000fcc0
Now it looks like a flags combinations.
For me as for reader would be better to see quickly a decoded line.

My proposal is to introduce something like following

_INT_ALL  GENMASK()
_INT_ENABLE (_INT_ALL & ~(_FOO | _BAR))
_INT_ERR ... similar way as above ...

What do you think?

Yes I considered that. I do prefer the simplicity of just writing the value directly. Doing GENMASK and then AND-ing out certain bits isn't that much more understandable, in my opinion. To understand each bit you'd still have to check the GENMASK against the bit fields defined above. And just OR-ing together all the bits would be very lengthy for such an expression. Up to you, I will follow your suggestion if you want.


+
+/* status register */
+#define I2C_STAT_INV_CMD       BIT(31)
+#define I2C_STAT_PARITY                BIT(30)
+#define I2C_STAT_BE_OVERRUN    BIT(29)
+#define I2C_STAT_BE_ACCESS     BIT(28)
+#define I2C_STAT_LOST_ARB      BIT(27)
+#define I2C_STAT_NACK          BIT(26)
+#define I2C_STAT_DAT_REQ       BIT(25)
+#define I2C_STAT_CMD_COMP      BIT(24)
+#define I2C_STAT_STOP_ERR      BIT(23)
+#define I2C_STAT_MAX_PORT      GENMASK(19, 16)
+#define I2C_STAT_ANY_INT       BIT(15)
+#define I2C_STAT_SCL_IN                BIT(11)
+#define I2C_STAT_SDA_IN                BIT(10)
+#define I2C_STAT_PORT_BUSY     BIT(9)
+#define I2C_STAT_SELF_BUSY     BIT(8)
+#define I2C_STAT_FIFO_COUNT    GENMASK(7, 0)
+
+#define I2C_STAT_ERR           0xfc800000
+#define I2C_STAT_ANY_RESP      0xff800000
Ditto.

+
+/* extended status register */
+#define I2C_ESTAT_FIFO_SZ      GENMASK(31, 24)
+#define I2C_ESTAT_SCL_IN_SY    BIT(15)
+#define I2C_ESTAT_SDA_IN_SY    BIT(14)
+#define I2C_ESTAT_S_SCL                BIT(13)
+#define I2C_ESTAT_S_SDA                BIT(12)
+#define I2C_ESTAT_M_SCL                BIT(11)
+#define I2C_ESTAT_M_SDA                BIT(10)
+#define I2C_ESTAT_HI_WATER     BIT(9)
+#define I2C_ESTAT_LO_WATER     BIT(8)
+#define I2C_ESTAT_PORT_BUSY    BIT(7)
+#define I2C_ESTAT_SELF_BUSY    BIT(6)
+#define I2C_ESTAT_VERSION      GENMASK(4, 0)
+
+struct fsi_i2c_master {
+       struct fsi_device       *fsi;
+       u8                      fifo_size;
+};
+
+static int fsi_i2c_read_reg(struct fsi_device *fsi, unsigned int reg,
+                           u32 *data)
+{
+       int rc;
+       __be32 data_be;
+
+       rc = fsi_device_read(fsi, reg, &data_be, sizeof(data_be));
+       if (rc)
+               return rc;
+
+       *data = be32_to_cpu(data_be);
+
+       return 0;
+}
+
+static int fsi_i2c_write_reg(struct fsi_device *fsi, unsigned int reg,
+                            u32 *data)
+{
+       __be32 data_be = cpu_to_be32p(data);
+
+       return fsi_device_write(fsi, reg, &data_be, sizeof(data_be));
+}
+
+static int fsi_i2c_dev_init(struct fsi_i2c_master *i2c)
+{
+       int rc;
+       u32 mode = I2C_MODE_ENHANCED, extended_status, watermark;
+       u32 interrupt = 0;
+
+       /* since we use polling, disable interrupts */
+       rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_INT_MASK, &interrupt);
+       if (rc)
+               return rc;
+
+       mode |= FIELD_PREP(I2C_MODE_CLKDIV, I2C_DEFAULT_CLK_DIV);
+       rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+       if (rc)
+               return rc;
+
+       rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_ESTAT, &extended_status);
+       if (rc)
+               return rc;
+
+       i2c->fifo_size = FIELD_GET(I2C_ESTAT_FIFO_SZ, extended_status);
+       watermark = FIELD_PREP(I2C_WATERMARK_HI,
+                              i2c->fifo_size - I2C_FIFO_HI_LVL);
+       watermark |= FIELD_PREP(I2C_WATERMARK_LO, I2C_FIFO_LO_LVL);
+
+       return fsi_i2c_write_reg(i2c->fsi, I2C_FSI_WATER_MARK, &watermark);
+}
+
+static int fsi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+                       int num)
+{
+       return -EOPNOTSUPP;
+}
+
+static u32 fsi_i2c_functionality(struct i2c_adapter *adap)
+{
+       return I2C_FUNC_I2C | I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_10BIT_ADDR
+               | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
Perhaps one property per line?

At a quick glance through some other I2C bus drivers, it appears more standard to fit as many on a line as possible. I'll leave it as is unless anyone objects. I didn't get any checkpatch warning.

Thanks,
Eddie


+}
+
+static const struct i2c_algorithm fsi_i2c_algorithm = {
+       .master_xfer = fsi_i2c_xfer,
+       .functionality = fsi_i2c_functionality,
+};
+
+static int fsi_i2c_probe(struct device *dev)
+{
+       struct fsi_i2c_master *i2c;
+       int rc;
+
+       i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
+       if (!i2c)
+               return -ENOMEM;
+
+       i2c->fsi = to_fsi_dev(dev);
+
+       rc = fsi_i2c_dev_init(i2c);
+       if (rc)
+               return rc;
+
+       dev_set_drvdata(dev, i2c);
+
+       return 0;
+}
+
+static const struct fsi_device_id fsi_i2c_ids[] = {
+       { FSI_ENGID_I2C, FSI_VERSION_ANY },
+       { 0 }
0 is not required

+};
+
+static struct fsi_driver fsi_i2c_driver = {
+       .id_table = fsi_i2c_ids,
+       .drv = {
+               .name = "i2c-fsi",
+               .bus = &fsi_bus_type,
+               .probe = fsi_i2c_probe,
+       },
+};
+
+module_fsi_driver(fsi_i2c_driver);
+
+MODULE_AUTHOR("Eddie James <eajames@xxxxxxxxxx>");
+MODULE_DESCRIPTION("FSI attached I2C master");
+MODULE_LICENSE("GPL");
--
1.8.3.1




--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux