Move from dwc3-of-simple to dwc3-qcom glue driver to
support peripheral mode which requires qscratch wrapper
programming on VBUS event.
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
---
Changes since v1:
- Update unit address of DT node as per Doug's comment
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 6 ++++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 ++++++----
2 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index f45a0ab30d30..00be0d53891a 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -106,8 +106,9 @@
status = "okay";
};
- usb@6a00000 {
+ usb@6af8800 {
status = "okay";
+ extcon = <&usb3_id>;
dwc3@6a00000 {
extcon = <&usb3_id>;
@@ -122,8 +123,9 @@
pinctrl-0 = <&usb3_vbus_det_gpio>;
};
- usb@7600000 {
+ usb@76f8800 {
status = "okay";
+ extcon = <&usb2_id>;
dwc3@7600000 {
extcon = <&usb2_id>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 26292027ba9b..8b6dd5443524 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -776,8 +776,9 @@
status = "disabled";
};
- usb2: usb@7600000 {
- compatible = "qcom,dwc3";
+ usb2: usb@76f8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0x76f8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -804,8 +805,9 @@
};
};
- usb3: usb@6a00000 {
- compatible = "qcom,dwc3";
+ usb3: usb@6af8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0x6af8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
