Re: [PATCH v2] arm64: dts: msm8996: Use dwc3-qcom glue driver for USB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/31/2018 4:17 PM, Manu Gautam wrote:
Move from dwc3-of-simple to dwc3-qcom glue driver to
support peripheral mode which requires qscratch wrapper
programming on VBUS event.

Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
---

Changes since v1:
  - Update unit address of DT node as per Doug's comment

  arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi |  6 ++++--
  arch/arm64/boot/dts/qcom/msm8996.dtsi        | 10 ++++++----
  2 files changed, 10 insertions(+), 6 deletions(-)

Tested on DB820c. Works fine.
Tested-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>

BRs
Vivek

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index f45a0ab30d30..00be0d53891a 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -106,8 +106,9 @@
  			status = "okay";
  		};
- usb@6a00000 {
+		usb@6af8800 {
  			status = "okay";
+			extcon = <&usb3_id>;
dwc3@6a00000 {
  				extcon = <&usb3_id>;
@@ -122,8 +123,9 @@
  			pinctrl-0 = <&usb3_vbus_det_gpio>;
  		};
- usb@7600000 {
+		usb@76f8800 {
  			status = "okay";
+			extcon = <&usb2_id>;
dwc3@7600000 {
  				extcon = <&usb2_id>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 26292027ba9b..8b6dd5443524 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -776,8 +776,9 @@
  			status = "disabled";
  		};
- usb2: usb@7600000 {
-			compatible = "qcom,dwc3";
+		usb2: usb@76f8800 {
+			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+			reg = <0x76f8800 0x400>;
  			#address-cells = <1>;
  			#size-cells = <1>;
  			ranges;
@@ -804,8 +805,9 @@
  			};
  		};
- usb3: usb@6a00000 {
-			compatible = "qcom,dwc3";
+		usb3: usb@6af8800 {
+			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+			reg = <0x6af8800 0x400>;
  			#address-cells = <1>;
  			#size-cells = <1>;
  			ranges;

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux