Re: [PATCH 2/2] arm64: dts: renesas: condor: add I2C0 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 29, 2018 at 06:46:10PM +0300, Sergei Shtylyov wrote:
> Hello!
> 
> On 05/29/2018 04:10 PM, Simon Horman wrote:
> 
> >> Define the Condor board dependent part of the I2C0 device node.
> >>
> >> The I2C0 bus is populated by 2 ON Semiconductor PCA9654 I/O expanders
> >> and Analog Devices  ADV7511W HDMI transmitter (but we're only describing
> >> the former chips now).
> >>
> >> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
> >>
> >> ---
> >>  arch/arm64/boot/dts/renesas/r8a77980-condor.dts |   27 ++++++++++++++++++++++++
> >>  1 file changed, 27 insertions(+)
> >>
> >> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> >> ===================================================================
> >> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> >> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> >> @@ -80,6 +80,28 @@
> >>  	clock-frequency = <32768>;
> >>  };
> >>  
> >> +&i2c0 {
> >> +	pinctrl-0 = <&i2c0_pins>;
> >> +	pinctrl-names = "default";
> >> +
> >> +	status = "okay";
> >> +	clock-frequency = <400000>;
> >> +
> >> +	io_expander0: gpio@20 {
> > 
> > Hi Sergei,
> > 
> > I'm a little confused about where 0x20 and 0x21 are derived from.
> > Could you explain a little?
> 
>    r-carv3h_system_evaluation_board_rev020.pdf, pp. 16-17, lower left corners.
> The schematics gives the 8-bit read/write addresses but we use uniform 7-bit
> I2C address in DTs.

Thanks, this patch looks fine to me.
However, I'd like to give others a chance to review it,
and it is dependent on patch 1/2 where I have a different review question.

Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>

> >> +		compatible = "onnn,pca9654";
> >> +		reg = <0x20>;
> >> +		gpio-controller;
> >> +		#gpio-cells = <2>;
> >> +	};
> >> +
> >> +	io_expander1: gpio@21 {
> >> +		compatible = "onnn,pca9654";
> >> +		reg = <0x21>;
> >> +		gpio-controller;
> >> +		#gpio-cells = <2>;
> >> +	};
> >> +};
> >> +
> >>  &mmc0 {
> >>  	pinctrl-0 = <&mmc_pins>;
> >>  	pinctrl-1 = <&mmc_pins_uhs>;
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux