On Tue, May 29, 2018 at 01:02:21PM +0300, Tomer Maimon wrote:
> Add Nuvoton BMC NPCM7xx Pulse Width Modulation (PWM) driver.
>
> The Nuvoton BMC NPCM7xx has two identical PWM controller modules,
> each module has four PWM controller outputs.
>
I don't see it guaranteed that all future NPCM7xx devices will be PWM
controllers, much less that they will be compatible to the chip really
supported here. NPCM750, I presume ? I would suggest name the driver
accordingly.
As a generic pwm driver, not specifically tied to a fan controller,
this driver does not belong into hwmon. It should be added to the pwm
subsystem. Copying the maintainer and mailing list.
If the pwm chip is used to control fans, the existing pwm-fan driver can
then be used to create the necessary mapping from pwm controls to fans.
Guenter
> Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
> ---
> drivers/hwmon/Kconfig | 6 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/npcm7xx-pwm.c | 363 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 370 insertions(+)
> create mode 100644 drivers/hwmon/npcm7xx-pwm.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 6ec307c93ece..693ba09cff8e 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1891,6 +1891,12 @@ config SENSORS_XGENE
> If you say yes here you get support for the temperature
> and power sensors for APM X-Gene SoC.
>
> +config SENSORS_NPCM7XX
> + tristate "Nuvoton NPCM7XX PWM driver"
> + help
> + This driver provides support for Nuvoton NPCM7XX PWM
> + controller.
> +
> if ACPI
>
> comment "ACPI drivers"
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index e7d52a36e6c4..24aad895a3bb 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -174,6 +174,7 @@ obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
> obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
> obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
> obj-$(CONFIG_SENSORS_XGENE) += xgene-hwmon.o
> +obj-$(CONFIG_SENSORS_NPCM7XX) += npcm7xx-pwm.o
>
> obj-$(CONFIG_PMBUS) += pmbus/
>
> diff --git a/drivers/hwmon/npcm7xx-pwm.c b/drivers/hwmon/npcm7xx-pwm.c
> new file mode 100644
> index 000000000000..6122ca82b94d
> --- /dev/null
> +++ b/drivers/hwmon/npcm7xx-pwm.c
> @@ -0,0 +1,363 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2014-2018 Nuvoton Technology corporation.
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +#include <linux/clk.h>
> +#include <linux/platform_device.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/sysfs.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +
> +/* NPCM7XX PWM port base address */
> +#define NPCM7XX_PWM_REG_PR 0x0
> +#define NPCM7XX_PWM_REG_CSR 0x4
> +#define NPCM7XX_PWM_REG_CR 0x8
> +#define NPCM7XX_PWM_REG_CNRx(PORT) (0xC + (12 * PORT))
> +#define NPCM7XX_PWM_REG_CMRx(PORT) (0x10 + (12 * PORT))
> +#define NPCM7XX_PWM_REG_PDRx(PORT) (0x14 + (12 * PORT))
> +#define NPCM7XX_PWM_REG_PIER 0x3C
> +#define NPCM7XX_PWM_REG_PIIR 0x40
> +
> +#define NPCM7XX_PWM_CTRL_CH0_MODE_BIT BIT(3)
> +#define NPCM7XX_PWM_CTRL_CH1_MODE_BIT BIT(11)
> +#define NPCM7XX_PWM_CTRL_CH2_MODE_BIT BIT(15)
> +#define NPCM7XX_PWM_CTRL_CH3_MODE_BIT BIT(19)
> +
> +#define NPCM7XX_PWM_CTRL_CH0_INV_BIT BIT(2)
> +#define NPCM7XX_PWM_CTRL_CH1_INV_BIT BIT(10)
> +#define NPCM7XX_PWM_CTRL_CH2_INV_BIT BIT(14)
> +#define NPCM7XX_PWM_CTRL_CH3_INV_BIT BIT(18)
> +
> +#define NPCM7XX_PWM_CTRL_CH0_EN_BIT BIT(0)
> +#define NPCM7XX_PWM_CTRL_CH1_EN_BIT BIT(8)
> +#define NPCM7XX_PWM_CTRL_CH2_EN_BIT BIT(12)
> +#define NPCM7XX_PWM_CTRL_CH3_EN_BIT BIT(16)
> +
> +/* Define the maximum PWM channel number */
> +#define NPCM7XX_PWM_MAX_CHN_NUM 8
> +#define NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE 4
> +#define NPCM7XX_PWM_MAX_MODULES 2
> +
> +/* Define the Counter Register, value = 100 for match 100% */
> +#define NPCM7XX_PWM_COUNTER_DEFALUT_NUM 255
> +#define NPCM7XX_PWM_COMPARATOR_DEFALUT_NUM 127
> +
> +#define NPCM7XX_PWM_COMPARATOR_MAX 255
> +
> +
> +/* default all PWM channels PRESCALE2 = 1 */
> +#define NPCM7XX_PWM_PRESCALE2_DEFALUT_CH0 0x4
> +#define NPCM7XX_PWM_PRESCALE2_DEFALUT_CH1 0x40
> +#define NPCM7XX_PWM_PRESCALE2_DEFALUT_CH2 0x400
> +#define NPCM7XX_PWM_PRESCALE2_DEFALUT_CH3 0x4000
> +
> +#define PWM_OUTPUT_FREQ_25KHZ 25000
> +#define PWN_CNT_DEFAULT 256
> +#define MIN_PRESCALE1 2
> +#define NPCM7XX_PWM_PRESCALE_SHIFT_CH01 8
> +
> +#define NPCM7XX_PWM_PRESCALE2_DEFALUT (NPCM7XX_PWM_PRESCALE2_DEFALUT_CH0 | \
> + NPCM7XX_PWM_PRESCALE2_DEFALUT_CH1 | \
> + NPCM7XX_PWM_PRESCALE2_DEFALUT_CH2 | \
> + NPCM7XX_PWM_PRESCALE2_DEFALUT_CH3)
> +
> +#define NPCM7XX_PWM_CTRL_MODE_DEFALUT (NPCM7XX_PWM_CTRL_CH0_MODE_BIT | \
> + NPCM7XX_PWM_CTRL_CH1_MODE_BIT | \
> + NPCM7XX_PWM_CTRL_CH2_MODE_BIT | \
> + NPCM7XX_PWM_CTRL_CH3_MODE_BIT)
> +
> +#define NPCM7XX_PWM_CTRL_EN_DEFALUT (NPCM7XX_PWM_CTRL_CH0_EN_BIT | \
> + NPCM7XX_PWM_CTRL_CH1_EN_BIT | \
> + NPCM7XX_PWM_CTRL_CH2_EN_BIT | \
> + NPCM7XX_PWM_CTRL_CH3_EN_BIT)
> +
> +struct npcm7xx_pwm_data {
> + unsigned long clk_freq;
> + void __iomem *pwm_base[NPCM7XX_PWM_MAX_MODULES];
> + struct mutex npcm7xx_pwm_lock[NPCM7XX_PWM_MAX_CHN_NUM];
> +};
> +
> +static const struct of_device_id pwm_dt_id[];
> +
> +static int npcm7xx_pwm_config_set(struct npcm7xx_pwm_data *data, int channel,
> + u16 val)
> +{
> + u32 PWMChannel = (channel % NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
> + u32 n_module = (channel / NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
> + u32 u32TmpBuf = 0, ctrl_en_bit;
> +
> + /*
> + * Config PWM Comparator register for setting duty cycle
> + */
> + if (val < 0 || val > NPCM7XX_PWM_COMPARATOR_MAX)
> + return -EINVAL;
> +
> + /* write new CMR value */
> + iowrite32(val, data->pwm_base[n_module] +
> + NPCM7XX_PWM_REG_CMRx(PWMChannel));
> +
> + u32TmpBuf = ioread32(data->pwm_base[n_module] + NPCM7XX_PWM_REG_CR);
> +
> + switch (PWMChannel) {
> + case 0:
> + ctrl_en_bit = NPCM7XX_PWM_CTRL_CH0_EN_BIT;
> + break;
> + case 1:
> + ctrl_en_bit = NPCM7XX_PWM_CTRL_CH1_EN_BIT;
> + break;
> + case 2:
> + ctrl_en_bit = NPCM7XX_PWM_CTRL_CH2_EN_BIT;
> + break;
> + case 3:
> + ctrl_en_bit = NPCM7XX_PWM_CTRL_CH3_EN_BIT;
> + break;
> + default:
> + return -ENODEV;
> + }
> +
> + if (val == 0)
> + /* Disable PWM */
> + u32TmpBuf &= ~(ctrl_en_bit);
> + else
> + /* Enable PWM */
> + u32TmpBuf |= ctrl_en_bit;
> +
> + mutex_lock(&data->npcm7xx_pwm_lock[n_module]);
> + iowrite32(u32TmpBuf, data->pwm_base[n_module] + NPCM7XX_PWM_REG_CR);
> + mutex_unlock(&data->npcm7xx_pwm_lock[n_module]);
> +
> + return 0;
> +}
> +
> +static int npcm7xx_read_pwm(struct device *dev, u32 attr, int channel,
> + long *val)
> +{
> + struct npcm7xx_pwm_data *data = dev_get_drvdata(dev);
> + u32 PWMChannel = (channel % NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
> + u32 n_module = (channel / NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
> +
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + switch (attr) {
> + case hwmon_pwm_input:
> + *val = (long)ioread32(data->pwm_base[n_module] +
> + NPCM7XX_PWM_REG_CMRx(PWMChannel));
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int npcm7xx_write_pwm(struct device *dev, u32 attr, int channel,
> + long val)
> +{
> + struct npcm7xx_pwm_data *data = dev_get_drvdata(dev);
> + int err = 0;
> +
> + switch (attr) {
> + case hwmon_pwm_input:
> + err = npcm7xx_pwm_config_set(data, channel, (u16)val);
> + break;
> + default:
> + err = -EOPNOTSUPP;
> + break;
> + }
> +
> + return err;
> +}
> +
> +static umode_t npcm7xx_pwm_is_visible(const void *_data, u32 attr, int channel)
> +{
> + switch (attr) {
> + case hwmon_pwm_input:
> + return 0644;
> + default:
> + return 0;
> + }
> +}
> +
> +static int npcm7xx_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + switch (type) {
> + case hwmon_pwm:
> + return npcm7xx_read_pwm(dev, attr, channel, val);
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int npcm7xx_write(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long val)
> +{
> + switch (type) {
> + case hwmon_pwm:
> + return npcm7xx_write_pwm(dev, attr, channel, val);
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static umode_t npcm7xx_is_visible(const void *data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + switch (type) {
> + case hwmon_pwm:
> + return npcm7xx_pwm_is_visible(data, attr, channel);
> + default:
> + return 0;
> + }
> +}
> +
> +static const u32 npcm7xx_pwm_config[] = {
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + 0
> +};
> +
> +static const struct hwmon_channel_info npcm7xx_pwm = {
> + .type = hwmon_pwm,
> + .config = npcm7xx_pwm_config,
> +};
> +
> +static const struct hwmon_channel_info *npcm7xx_info[] = {
> + &npcm7xx_pwm,
> + NULL
> +};
> +
> +static const struct hwmon_ops npcm7xx_hwmon_ops = {
> + .is_visible = npcm7xx_is_visible,
> + .read = npcm7xx_read,
> + .write = npcm7xx_write,
> +};
> +
> +static const struct hwmon_chip_info npcm7xx_chip_info = {
> + .ops = &npcm7xx_hwmon_ops,
> + .info = npcm7xx_info,
> +};
> +
> +static int npcm7xx_pwm_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct npcm7xx_pwm_data *data;
> + struct resource res[NPCM7XX_PWM_MAX_MODULES];
> + struct device *hwmon;
> + struct clk *clk;
> + int m, ch, res_cnt, ret;
> + u32 Prescale_val, output_freq;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + for (res_cnt = 0; res_cnt < NPCM7XX_PWM_MAX_MODULES ; res_cnt++) {
> + ret = of_address_to_resource(dev->of_node, res_cnt,
> + &res[res_cnt]);
> + if (ret) {
> + pr_err("PWM of_address_to_resource fail ret %d\n",
> + ret);
> + return -EINVAL;
> + }
> +
> + data->pwm_base[res_cnt] =
> + devm_ioremap_resource(dev, &(res[res_cnt]));
> + pr_debug("pwm%d base is 0x%08X, res.start 0x%08X , size 0x%08X\n",
> + res_cnt, (u32)data->pwm_base[res_cnt],
> + res[res_cnt].start, resource_size(&(res[res_cnt])));
> +
> + if (!data->pwm_base[res_cnt]) {
> + pr_err("pwm probe failed: can't read pwm base address for resource %d.\n",
> + res_cnt);
> + return -ENOMEM;
> + }
> +
> + mutex_init(&data->npcm7xx_pwm_lock[res_cnt]);
> + }
> +
> + clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(clk))
> + return -ENODEV;
> +
> + data->clk_freq = clk_get_rate(clk);
> +
> + /* Adjust NPCM7xx PWMs output frequency to ~25Khz */
> + output_freq = data->clk_freq / PWN_CNT_DEFAULT;
> + Prescale_val = DIV_ROUND_CLOSEST(output_freq, PWM_OUTPUT_FREQ_25KHZ);
> +
> + /* If Prescale_val = 0, then the prescale output clock is stopped */
> + if (Prescale_val < MIN_PRESCALE1)
> + Prescale_val = MIN_PRESCALE1;
> + /*
> + * Prescale_val need to decrement in one because in the PWM Prescale
> + * register the Prescale value increment by one
> + */
> + Prescale_val--;
> +
> + /* Setting PWM Prescale Register value register to both modules */
> + Prescale_val |= (Prescale_val << NPCM7XX_PWM_PRESCALE_SHIFT_CH01);
> +
> + for (m = 0; m < NPCM7XX_PWM_MAX_MODULES ; m++) {
> + iowrite32(Prescale_val,
> + data->pwm_base[m] + NPCM7XX_PWM_REG_PR);
> + iowrite32(NPCM7XX_PWM_PRESCALE2_DEFALUT,
> + data->pwm_base[m] + NPCM7XX_PWM_REG_CSR);
> + iowrite32(NPCM7XX_PWM_CTRL_MODE_DEFALUT,
> + data->pwm_base[m] + NPCM7XX_PWM_REG_CR);
> +
> + for (ch = 0; ch < NPCM7XX_PWM_MAX_CHN_NUM; ch++) {
> + iowrite32(NPCM7XX_PWM_COUNTER_DEFALUT_NUM,
> + data->pwm_base[m] + NPCM7XX_PWM_REG_CNRx(ch));
> + iowrite32(NPCM7XX_PWM_COMPARATOR_DEFALUT_NUM,
> + data->pwm_base[m] + NPCM7XX_PWM_REG_CMRx(ch));
> + }
> +
> + iowrite32(NPCM7XX_PWM_CTRL_MODE_DEFALUT |
> + NPCM7XX_PWM_CTRL_EN_DEFALUT,
> + data->pwm_base[m] + NPCM7XX_PWM_REG_CR);
> + }
> +
> + hwmon = devm_hwmon_device_register_with_info(dev, "npcm7xx_pwm", data,
> + &npcm7xx_chip_info, NULL);
> +
> + if (IS_ERR(hwmon)) {
> + pr_err("PWM Driver failed - devm_hwmon_device_register_with_groups failed\n");
> + return PTR_ERR(hwmon);
> + }
> +
> + pr_info("NPCM7XX PWM Driver probed, PWM output Freq %dHz\n",
> + output_freq / ((Prescale_val & 0xf) + 1));
> +
> + return 0;
> +}
> +
> +static const struct of_device_id of_pwm_match_table[] = {
> + { .compatible = "nuvoton,npcm750-pwm", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, of_pwm_match_table);
> +
> +static struct platform_driver npcm7xx_pwm_driver = {
> + .probe = npcm7xx_pwm_probe,
> + .driver = {
> + .name = "npcm7xx_pwm",
> + .of_match_table = of_pwm_match_table,
> + },
> +};
> +
> +module_platform_driver(npcm7xx_pwm_driver);
> +
> +MODULE_DESCRIPTION("Nuvoton NPCM7XX PWM Driver");
> +MODULE_AUTHOR("Tomer Maimon <tomer.maimon@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.14.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
