This patch set adds Pulse Width Modulation (PWM) support for the Nuvoton NPCM7xx Baseboard Management Controller (BMC). The NPCM7xx PWM controller can support 8 PWM output ports. The hwmon driver provides sysfs entries through which the user can configure and get the duty cycle between 0 (disable the specific PWM) to 255 of particular PWM output port. The NPCM7xx PWM driver tested on NPCM750 evaluation board. Tomer Maimon (2): dt-binding: hwmon: Add NPCM7xx PWM documentation hwmon: npcm-pwm: add NPCM7xx PWM driver .../devicetree/bindings/hwmon/npcm7xx-pwm.txt | 25 ++ drivers/hwmon/Kconfig | 6 + drivers/hwmon/Makefile | 1 + drivers/hwmon/npcm7xx-pwm.c | 363 +++++++++++++++++++++ 4 files changed, 395 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/npcm7xx-pwm.txt create mode 100644 drivers/hwmon/npcm7xx-pwm.c -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
