Re: [PATCH v7 2/2] leds: lm3601x: Introduce the lm3601x LED driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jacek

Thanks for the review

On 05/21/2018 04:09 PM, Jacek Anaszewski wrote:
> Hi Dan,
> 
> Thank you for the update.
> 
> On 05/21/2018 08:09 PM, Dan Murphy wrote:
>> Introduce the family of LED devices that can
>> drive a torch, strobe or IR LED.
>>
>> The LED driver can be configured with a strobe
>> timer to execute a strobe flash.  The IR LED
>> brightness is controlled via the torch brightness
>> register.
>>
>> The data sheet for each the LM36010 and LM36011
>> LED drivers can be found here:
>> http://www.ti.com/product/LM36010
>> http://www.ti.com/product/LM36011
>>
>> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
>> ---
>>
>> v7 - Numerous fixes to many to list.  Highlights are moved from OF APIs to device_property
>> APIs, updated LED registration, timeout to reg algorithim, and fixed label generation -
>> https://patchwork.kernel.org/patch/10401437/
>>
>> v6 - This driver has been heavily modified from v5.  There is no longer reading
>> of individual child nodes.  There are too many changes to list here see -
>> https://patchwork.kernel.org/patch/10392123/
>> v5 - Fixed magic numbers, change reg cache type, added of_put_node to release
>> the dt node ref, and I did not change the remove function to leave the LED in its
>> state on driver removal - https://patchwork.kernel.org/patch/10391741/
>> v4 - Fixed Cocci issue using ARRAY_SIZE - https://patchwork.kernel.org/patch/10389259/
>> v3 - removed wildcard dt compatible, fixed copyright, fixed struct doc, removed
>> RO registers from default, added regmap volatile for FLAGS_REG, updated regmap cache type,
>> fixed unlock and extra semi colon in strobe_set, removed unnecessary out label
>> in led register and fixed checking of the ret in brightness_set - https://patchwork.kernel.org/patch/10386243/
>> v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/
>>
>>   drivers/leds/Kconfig        |   9 +
>>   drivers/leds/Makefile       |   1 +
>>   drivers/leds/leds-lm3601x.c | 501 ++++++++++++++++++++++++++++++++++++
>>   3 files changed, 511 insertions(+)
>>   create mode 100644 drivers/leds/leds-lm3601x.c
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 2c896c0e69e1..50ae536f343f 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -145,6 +145,15 @@ config LEDS_LM3692X
>>         This option enables support for the TI LM3692x family
>>         of white LED string drivers used for backlighting.
>>   +config LEDS_LM3601X
>> +    tristate "LED support for LM3601x Chips"
>> +    depends on LEDS_CLASS && I2C && OF
>> +    depends on LEDS_CLASS_FLASH
>> +    select REGMAP_I2C
>> +    help
>> +      This option enables support for the TI LM3601x family
>> +      of flash, torch and indicator classes.
>> +
>>   config LEDS_LOCOMO
>>       tristate "LED Support for Locomo device"
>>       depends on LEDS_CLASS
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index 91eca81cae82..b79807fe1b67 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG)        += leds-mlxreg.o
>>   obj-$(CONFIG_LEDS_NIC78BX)        += leds-nic78bx.o
>>   obj-$(CONFIG_LEDS_MT6323)        += leds-mt6323.o
>>   obj-$(CONFIG_LEDS_LM3692X)        += leds-lm3692x.o
>> +obj-$(CONFIG_LEDS_LM3601X)        += leds-lm3601x.o
>>     # LED SPI Drivers
>>   obj-$(CONFIG_LEDS_DAC124S085)        += leds-dac124s085.o
>> diff --git a/drivers/leds/leds-lm3601x.c b/drivers/leds/leds-lm3601x.c
>> new file mode 100644
>> index 000000000000..7c71cb11d474
>> --- /dev/null
>> +++ b/drivers/leds/leds-lm3601x.c
>> @@ -0,0 +1,501 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Flash and torch driver for Texas Instruments LM3601X LED
>> +// Flash driver chip family
>> +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> +
>> +#include <linux/delay.h>
>> +#include <linux/i2c.h>
>> +#include <linux/leds.h>
>> +#include <linux/led-class-flash.h>
>> +#include <linux/module.h>
>> +#include <linux/regmap.h>
>> +#include <linux/slab.h>
>> +#include <uapi/linux/uleds.h>
>> +
>> +#define LM3601X_LED_IR        0x0
>> +#define LM3601X_LED_TORCH    0x1
>> +
>> +/* Registers */
>> +#define LM3601X_ENABLE_REG    0x01
>> +#define LM3601X_CFG_REG        0x02
>> +#define LM3601X_LED_FLASH_REG    0x03
>> +#define LM3601X_LED_TORCH_REG    0x04
>> +#define LM3601X_FLAGS_REG    0x05
>> +#define LM3601X_DEV_ID_REG    0x06
>> +
>> +#define LM3601X_SW_RESET    BIT(7)
>> +
>> +/* Enable Mode bits */
>> +#define LM3601X_MODE_STANDBY    0x00
>> +#define LM3601X_MODE_IR_DRV    BIT(0)
>> +#define LM3601X_MODE_TORCH    BIT(1)
>> +#define LM3601X_MODE_STROBE    (BIT(0) | BIT(1))
>> +#define LM3601X_STRB_EN        BIT(2)
>> +#define LM3601X_STRB_EDGE_TRIG    BIT(3)
>> +#define LM3601X_IVFM_EN        BIT(4)
>> +
>> +#define LM36010_BOOST_LIMIT_28    BIT(5)
>> +#define LM36010_BOOST_FREQ_4MHZ    BIT(6)
>> +#define LM36010_BOOST_MODE_PASS    BIT(7)
>> +
>> +/* Flag Mask */
>> +#define LM3601X_FLASH_TIME_OUT    BIT(0)
>> +#define LM3601X_UVLO_FAULT    BIT(1)
>> +#define LM3601X_THERM_SHUTDOWN    BIT(2)
>> +#define LM3601X_THERM_CURR    BIT(3)
>> +#define LM36010_CURR_LIMIT    BIT(4)
>> +#define LM3601X_SHORT_FAULT    BIT(5)
>> +#define LM3601X_IVFM_TRIP    BIT(6)
>> +#define LM36010_OVP_FAULT    BIT(7)
>> +
>> +#define LM3601X_MAX_TORCH_I_UA    376000
>> +#define LM3601X_MIN_TORCH_I_UA    2400
>> +#define LM3601X_TORCH_REG_DIV    3000
>> +
>> +#define LM3601X_MAX_STROBE_I_UA    1500000
>> +#define LM3601X_MIN_STROBE_I_UA    11000
>> +#define LM3601X_STROBE_REG_DIV    11800
>> +
>> +#define LM3601X_TIMEOUT_MASK    0x1e
>> +#define LM3601X_ENABLE_MASK    0x03
>> +
>> +#define LM3601X_LOWER_STEP_US    40000
>> +#define LM3601X_UPPER_STEP_US    200000
>> +#define LM3601X_MIN_TIMEOUT_US    40000
>> +#define LM3601X_MAX_TIMEOUT_US    1600000
>> +#define LM3601X_TIMEOUT_XOVER    400000
>> +
>> +enum lm3601x_type {
>> +    CHIP_LM36010 = 0,
>> +    CHIP_LM36011,
>> +};
>> +
>> +/**
>> + * struct lm3601x_led -
>> + * @fled_cdev: flash led class device pointer
> 
> s/led/LED/

Ack

> 
>> + * @client: Pointer to the I2C client
>> + * @regmap: Devices register map
>> + * @lock: Lock for reading/writing the device
>> + * @led_name: LED label for the Torch or IR LED
>> + * @strobe_timeout: the timeout for the strobe
>> + * @last_flag: last known flags register value
>> + * @torch_current_max: maximum current for the torch
>> + * @strobe_current_max: maximum current for the strobe
>> + * @max_strobe_timeout: maximum timeout for the strobe
>> + * @led_mode: The mode to enable either IR or Torch
>> + */
>> +struct lm3601x_led {
>> +    struct led_classdev_flash fled_cdev;
>> +    struct i2c_client *client;
>> +    struct regmap *regmap;
>> +    struct mutex lock;
>> +
>> +    char led_name[LED_MAX_NAME_SIZE];
>> +
>> +    unsigned int strobe_timeout;
>> +    unsigned int last_flag;
>> +
>> +    u32 torch_current_max;
>> +    u32 strobe_current_max;
>> +    u32 max_strobe_timeout;
>> +
>> +    u32 led_mode;
>> +};
>> +
>> +static const struct reg_default lm3601x_regmap_defs[] = {
>> +    { LM3601X_ENABLE_REG, 0x20 },
>> +    { LM3601X_CFG_REG, 0x15 },
>> +    { LM3601X_LED_FLASH_REG, 0x00 },
>> +    { LM3601X_LED_TORCH_REG, 0x00 },
>> +};
>> +
>> +static bool lm3601x_volatile_reg(struct device *dev, unsigned int reg)
>> +{
>> +    switch (reg) {
>> +    case LM3601X_FLAGS_REG:
>> +        return true;
>> +    default:
>> +        return false;
>> +    }
>> +}
>> +
>> +static const struct regmap_config lm3601x_regmap = {
>> +    .reg_bits = 8,
>> +    .val_bits = 8,
>> +
>> +    .max_register = LM3601X_DEV_ID_REG,
>> +    .reg_defaults = lm3601x_regmap_defs,
>> +    .num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs),
>> +    .cache_type = REGCACHE_RBTREE,
>> +    .volatile_reg = lm3601x_volatile_reg,
>> +};
>> +
>> +static struct lm3601x_led *fled_cdev_to_led(
>> +                struct led_classdev_flash *fled_cdev)
>> +{
>> +    return container_of(fled_cdev, struct lm3601x_led, fled_cdev);
>> +}
>> +
>> +static int lm3601x_read_faults(struct lm3601x_led *led)
>> +{
>> +    int flags_val;
>> +    int ret;
>> +
>> +    ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val);
>> +    if (ret < 0)
>> +        return -EIO;
>> +
>> +    led->last_flag = 0;
>> +
>> +    if (flags_val & LM36010_OVP_FAULT)
>> +        led->last_flag |= LED_FAULT_OVER_VOLTAGE;
>> +
>> +    if (flags_val & (LM3601X_THERM_SHUTDOWN | LM3601X_THERM_CURR))
>> +        led->last_flag |= LED_FAULT_OVER_TEMPERATURE;
>> +
>> +    if (flags_val & LM3601X_SHORT_FAULT)
>> +        led->last_flag |= LED_FAULT_SHORT_CIRCUIT;
>> +
>> +    if (flags_val & LM36010_CURR_LIMIT)
>> +        led->last_flag |= LED_FAULT_OVER_CURRENT;
>> +
>> +    if (flags_val & LM3601X_UVLO_FAULT)
>> +        led->last_flag |= LED_FAULT_UNDER_VOLTAGE;
>> +
>> +    if (flags_val & LM3601X_IVFM_TRIP)
>> +        led->last_flag |= LED_FAULT_INPUT_VOLTAGE;
>> +
>> +    if (flags_val & LM3601X_THERM_SHUTDOWN)
>> +        led->last_flag |= LED_FAULT_LED_OVER_TEMPERATURE;
>> +
>> +    return led->last_flag;
>> +}
>> +
>> +static int lm3601x_brightness_set(struct led_classdev *cdev,
>> +                    enum led_brightness brightness)
>> +{
>> +    struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev);
>> +    struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
>> +    int ret, led_mode_val;
>> +    u8 brightness_val;
>> +
>> +    mutex_lock(&led->lock);
>> +
>> +    ret = lm3601x_read_faults(led);
>> +    if (ret < 0)
>> +        goto out;
>> +
>> +    if (led->led_mode == LM3601X_LED_TORCH)
>> +        led_mode_val = LM3601X_MODE_TORCH;
>> +    else
>> +        led_mode_val = LM3601X_MODE_IR_DRV;
>> +
>> +    if (brightness == LED_OFF) {
>> +        ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> +                    led_mode_val, LED_OFF);
>> +        goto out;
>> +    }
>> +
>> +    if (brightness == LED_ON)
>> +        brightness_val = LED_ON;
> 
> Use of LED_ON enum can be a bit misleading here,
> It was designed for LEDs that can be only turned on/off.
> 
> You can use DIV_ROUND_UP to achieve the same in a more clear way.

ACK

> 
>> +    else
>> +        brightness_val = brightness / LM3601X_TORCH_REG_DIV;
>> +
>> +    ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness_val);
>> +    if (ret < 0)
>> +        goto out;
>> +
>> +    ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> +                LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV,
>> +                led_mode_val);
>> +out:
>> +    mutex_unlock(&led->lock);
>> +    return ret;
>> +}
>> +
>> +static int lm3601x_strobe_set(struct led_classdev_flash *fled_cdev,
>> +                bool state)
>> +{
>> +    struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
>> +    int timeout_reg_val = 0;
>> +    int current_timeout;
>> +    int ret;
>> +
>> +    mutex_lock(&led->lock);
>> +
>> +    ret = regmap_read(led->regmap, LM3601X_CFG_REG, &current_timeout);
>> +    if (ret < 0)
>> +        goto out;
>> +
>> +    if (led->strobe_timeout >= LM3601X_TIMEOUT_XOVER)
>> +        timeout_reg_val = led->strobe_timeout / LM3601X_UPPER_STEP_US + 0x07;
>> +    else
>> +        timeout_reg_val = led->strobe_timeout / LM3601X_LOWER_STEP_US - 0x01;
>> +
>> +    if (led->strobe_timeout != current_timeout)
>> +        ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG,
>> +                    LM3601X_TIMEOUT_MASK, timeout_reg_val);
>> +
>> +    if (state)
>> +        ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> +                    LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV,
>> +                    LM3601X_MODE_STROBE);
>> +    else
>> +        ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> +                    LM3601X_MODE_STROBE, LED_OFF);
>> +
>> +    ret = lm3601x_read_faults(led);
>> +out:
>> +    mutex_unlock(&led->lock);
>> +    return ret;
>> +}
>> +
>> +static int lm3601x_strobe_brightness_set(struct led_classdev_flash *fled_cdev,
>> +                    u32 brightness)
>> +{
>> +    struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
>> +    int ret;
>> +    u8 brightness_val;
>> +
>> +    mutex_lock(&led->lock);
>> +    ret = lm3601x_read_faults(led);
>> +    if (ret < 0)
>> +        goto out;
>> +
>> +    if (brightness == LED_OFF) {
>> +        ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> +                    LM3601X_MODE_STROBE, LED_OFF);
>> +        goto out;
>> +    }
>> +
>> +    if (brightness == LED_ON)
>> +        brightness_val = LED_ON;
> 
> Ditto.

ACK

> 
>> +    else
>> +        brightness_val = brightness / LM3601X_STROBE_REG_DIV;
>> +
>> +    ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val);
>> +out:
>> +    mutex_unlock(&led->lock);
>> +    return ret;
>> +}
>> +
>> +static int lm3601x_strobe_timeout_set(struct led_classdev_flash *fled_cdev,
>> +                u32 timeout)
>> +{
>> +    struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
>> +    int ret = 0;
>> +
>> +    mutex_lock(&led->lock);
>> +
>> +    led->strobe_timeout = timeout;
>> +
>> +    mutex_unlock(&led->lock);
>> +
>> +    return ret;
>> +}
>> +
>> +static int lm3601x_strobe_get(struct led_classdev_flash *fled_cdev,
>> +                bool *state)
>> +{
>> +    struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
>> +    int ret;
>> +    int strobe_state;
>> +
>> +    mutex_lock(&led->lock);
>> +
>> +    ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &strobe_state);
>> +    if (ret < 0)
>> +        goto out;
>> +
>> +    *state = strobe_state & LM3601X_MODE_STROBE;
>> +
>> +out:
>> +    mutex_unlock(&led->lock);
>> +    return ret;
>> +}
>> +
>> +static int lm3601x_strobe_fault_get(struct led_classdev_flash *fled_cdev,
>> +                u32 *fault)
>> +{
>> +    struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
>> +
>> +    lm3601x_read_faults(led);
>> +
>> +    *fault = led->last_flag;
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct led_flash_ops strobe_ops = {
>> +    .flash_brightness_set    = lm3601x_strobe_brightness_set,
> 
> s/strobe/flash/

ACK

> 
>> +    .strobe_set        = lm3601x_strobe_set,
>> +    .strobe_get        = lm3601x_strobe_get,
>> +    .timeout_set        = lm3601x_strobe_timeout_set,
> 
> Ditto.

ACK

> 
>> +    .fault_get        = lm3601x_strobe_fault_get,
> 
> Ditto.

ACK

> 
>> +};
>> +
>> +static int lm3601x_register_leds(struct lm3601x_led *led)
>> +{
>> +    struct led_classdev *led_cdev;
>> +    struct led_flash_setting *setting;
>> +
>> +    led->fled_cdev.ops = &strobe_ops;
>> +
>> +    setting = &led->fled_cdev.timeout;
>> +    setting->min = LM3601X_MIN_TIMEOUT_US;
>> +    setting->max = led->max_strobe_timeout;
>> +    setting->step = LM3601X_LOWER_STEP_US;
>> +    setting->val = led->max_strobe_timeout;
>> +
>> +    setting = &led->fled_cdev.brightness;
>> +    setting->min = LM3601X_MIN_STROBE_I_UA;
>> +    setting->max = LM3601X_MAX_STROBE_I_UA;
>> +    setting->step = LM3601X_TORCH_REG_DIV;
>> +    setting->val = led->strobe_current_max;
>> +
>> +    led_cdev = &led->fled_cdev.led_cdev;
>> +    led_cdev->name = led->led_name;
>> +    led_cdev->brightness_set_blocking = lm3601x_brightness_set;
>> +    led_cdev->max_brightness = LM3601X_MAX_TORCH_I_UA;
> 
> LED class brightness is expressed in levels, so:
> 
> led_cdev->max_brightness = DIV_ROUND_UP(LM3601X_MAX_TORCH_I_UA, LM3601X_TORCH_REG_DIV)

ACK

> 
>> +    led_cdev->flags |= LED_DEV_CAP_FLASH;
>> +
>> +    return led_classdev_flash_register(&led->client->dev, &led->fled_cdev);
>> +}
>> +
>> +static int lm3601x_parse_node(struct lm3601x_led *led,
>> +                  struct device_node *node)
>> +{
>> +    struct fwnode_handle *child = NULL;
>> +    int ret = -ENODEV;
>> +    const char *name;
>> +
>> +    child = device_get_next_child_node(&led->client->dev, child);
>> +    if (!child) {
>> +        dev_err(&led->client->dev, "No LED Child node\n");
>> +        return ret;
>> +    }
>> +
>> +    ret = fwnode_property_read_u32(child, "reg", &led->led_mode);
>> +    if (ret) {
>> +        dev_err(&led->client->dev, "reg DT property missing\n");
>> +        goto out_err;
>> +    }
>> +
>> +    if (led->led_mode > LM3601X_LED_TORCH ||
>> +        led->led_mode < LM3601X_LED_IR) {
>> +        dev_warn(&led->client->dev, "Invalid led mode requested\n");
>> +        ret = -EINVAL;
>> +        goto out_err;
>> +    }
>> +
>> +    ret = fwnode_property_read_string(child, "label", &name);
>> +    if (ret) {
>> +        if (led->led_mode == LM3601X_LED_TORCH)
>> +            name = "torch";
>> +        else
>> +            name = "infrared";
>> +    }
>> +
>> +    snprintf(led->led_name, sizeof(led->led_name),
>> +        "%s:%s", node->name, name);
> 
> Reading once again my recent explanation regarding this I realized
> that I didn't provide clear conclusion, which is: we no longer
> use child node name for LED class device name if label is absent.
> (apart from that - you're using parent DT node now, i.e.
> led-controller).
> 
> Please follow what was done for drivers/leds/leds-cr0014114.c.

Hmmm.  If this is calling dev->of_node->name to store the name will this
work in non-DT configurations?

I have not dug to deeply into the fwnode code to find out how the nodes
get populated.  So my question may not even be valid.



> 
>> +    ret = fwnode_property_read_u32(child, "led-max-microamp",
>> +                    &led->torch_current_max);
>> +    if (ret < 0) {
>> +        dev_warn(&led->client->dev,
>> +            "led-max-microamp DT property missing\n");
>> +        goto out_err;
>> +    }
>> +
>> +    ret = fwnode_property_read_u32(child, "flash-max-microamp",
>> +                &led->strobe_current_max);
>> +    if (ret < 0) {
>> +        dev_warn(&led->client->dev,
>> +             "flash-max-microamp DT property missing\n");
>> +        goto out_err;
>> +    }
>> +
>> +    ret = fwnode_property_read_u32(child, "flash-max-timeout-us",
>> +                &led->max_strobe_timeout);
>> +    if (ret < 0) {
>> +        dev_warn(&led->client->dev,
>> +             "flash-max-timeout-us DT property missing\n");
>> +        goto out_err;
>> +    }
>> +
>> +out_err:
>> +    fwnode_handle_put(child);
>> +    return ret;
>> +}
>> +
>> +static int lm3601x_probe(struct i2c_client *client,
>> +            const struct i2c_device_id *id)
>> +{
>> +    struct lm3601x_led *led;
>> +    int err;
>> +
>> +    led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
>> +    if (!led)
>> +        return -ENOMEM;
>> +
>> +    led->client = client;
>> +    i2c_set_clientdata(client, led);
>> +
>> +    err = lm3601x_parse_node(led, client->dev.of_node);
>> +    if (err < 0)
>> +        return -ENODEV;
>> +
>> +    led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap);
>> +    if (IS_ERR(led->regmap)) {
>> +        err = PTR_ERR(led->regmap);
>> +        dev_err(&client->dev,
>> +            "Failed to allocate register map: %d\n", err);
>> +        return err;
>> +    }
>> +
>> +    mutex_init(&led->lock);
>> +
>> +    err = lm3601x_register_leds(led);
> 
> return lm3601x_register_leds(led)

ACK.  I will end up dumping the err variable altogether

> 
>> +
>> +    return err;
>> +}
>> +
>> +static int lm3601x_remove(struct i2c_client *client)
>> +{
>> +    struct lm3601x_led *led = i2c_get_clientdata(client);
>> +
>> +    regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> +               LM3601X_ENABLE_MASK,
>> +               LM3601X_MODE_STANDBY);
>> +
> 
> mutex_destroy() is missing.
> 
>> +    return 0;
>> +}
>> +
>> +static const struct i2c_device_id lm3601x_id[] = {
>> +    { "LM36010", CHIP_LM36010 },
>> +    { "LM36011", CHIP_LM36011 },
>> +    { }
>> +};
>> +MODULE_DEVICE_TABLE(i2c, lm3601x_id);
>> +
>> +static const struct of_device_id of_lm3601x_leds_match[] = {
>> +    { .compatible = "ti,lm36010", },
>> +    { .compatible = "ti,lm36011", },
>> +    { }
>> +};
>> +MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match);
>> +
>> +static struct i2c_driver lm3601x_i2c_driver = {
>> +    .driver = {
>> +        .name = "lm3601x",
>> +        .of_match_table = of_lm3601x_leds_match,
>> +    },
>> +    .probe = lm3601x_probe,
>> +    .remove = lm3601x_remove,
>> +    .id_table = lm3601x_id,
>> +};
>> +module_i2c_driver(lm3601x_i2c_driver);
>> +
>> +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X");
>> +MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx>");
>> +MODULE_LICENSE("GPL v2");
>>
> 


-- 
------------------
Dan Murphy
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux