Andy Thanks for the review. I was pretty sure I missed somethings. On 05/21/2018 03:44 PM, Andy Shevchenko wrote: > On Mon, May 21, 2018 at 9:09 PM, Dan Murphy <dmurphy@xxxxxx> wrote: >> Introduce the family of LED devices that can >> drive a torch, strobe or IR LED. >> >> The LED driver can be configured with a strobe >> timer to execute a strobe flash. The IR LED >> brightness is controlled via the torch brightness >> register. >> >> The data sheet for each the LM36010 and LM36011 >> LED drivers can be found here: >> http://www.ti.com/product/LM36010 >> http://www.ti.com/product/LM36011 > > Thanks for an update. My comments below. > >> +config LEDS_LM3601X >> + tristate "LED support for LM3601x Chips" >> + depends on LEDS_CLASS && I2C && OF > > Now OF here is superfluous. This is the first one I missed. ACK > >> + depends on LEDS_CLASS_FLASH >> + select REGMAP_I2C >> + help >> + This option enables support for the TI LM3601x family >> + of flash, torch and indicator classes. > >> +#define LM3601X_TIMEOUT_MASK 0x1e >> +#define LM3601X_ENABLE_MASK 0x03 > > I dunno if GENMASK() will be better here. I could probably make it more readable as well. I am thinking #define LM3601X_ENABLE_MASK (LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV) > >> +#define LM3601X_LOWER_STEP_US 40000 >> +#define LM3601X_UPPER_STEP_US 200000 >> +#define LM3601X_MIN_TIMEOUT_US 40000 >> +#define LM3601X_MAX_TIMEOUT_US 1600000 > >> +#define LM3601X_TIMEOUT_XOVER 400000 > > Missed unit? Ack > >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV, >> + led_mode_val); > >> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG, >> + LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV, >> + LM3601X_MODE_STROBE); > > Perhaps > #define ..._MODE_TORCH_WITH_IR (..._TOCRH | ..._IR_DRV) > ? > This was defined already I just did not use the #define but I will probably replace this with the LM3601X_ENABLE_MASK #define >> +static int lm3601x_probe(struct i2c_client *client, >> + const struct i2c_device_id *id) >> +{ >> + struct lm3601x_led *led; >> + int err; > >> + err = lm3601x_parse_node(led, client->dev.of_node); >> + if (err < 0) > >> + return -ENODEV; > > Shouldn't be > > return err; Ack. But I might just get rid of err altogether when I make the change below to return the status of the register. > > ? > >> + err = lm3601x_register_leds(led); >> + >> + return err; > > I will leave this to maintainers since you seems have strong > objections against more or less standard pattern, i.e. > > return lm3601x_register_leds(); ACk. I was going to change that but I was concerned about loosing err. But I can change it. > >> +} > -- ------------------ Dan Murphy -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
