Re: [PATCH] ARM: dts: omap3-beagle-xm: Add fixed 26MHz clock as fck for twl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Peter Ujfalusi <peter.ujfalusi@xxxxxx> [180406 07:01]:
> 
> 
> On 2018-04-05 16:15, Peter Ujfalusi wrote:
> > 
> > 
> > On 2018-04-05 14:52, Peter Ujfalusi wrote:
> >> The board uses 26MHz oscillator for the twl4030 HFCLK.
> >> This way we will not depend on the bootloader to configure the
> >> CFG_BOOT:HFCLK_FREQ
> >>
> >> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> >> ---
> >> Hi,
> >>
> >> there might be other boards (all omap3 boards with twl4030?) which uses the same
> >> setup, but I only have schematics for beagle-xm.
> >>
> >> In order for the driver to actually use the clock the 
> >> [PATCH] mfd: twl-core: Fix clock initialization
> >> need to be applied. W/o the twl-core patch the clock is just ignored.
> >>
> >> Regards,
> >> Peter
> >>
> >>  arch/arm/boot/dts/omap3-beagle-xm.dts | 10 ++++++++++
> >>  1 file changed, 10 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
> >> index 0349fcc9dc26..d80587de0bbf 100644
> >> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts
> >> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
> >> @@ -30,6 +30,13 @@
> >>  		ethernet = &ethernet;
> >>  	};
> >>  
> >> +	/* fixed 26MHz oscillator */
> >> +	hfclk_26m: oscillator {
> >> +		#clock-cells = <0>;
> >> +		compatible = "fixed-clock";
> >> +		clock-frequency = <26000000>;
> >> +	};
> >> +
> >>  	leds {
> >>  		compatible = "gpio-leds";
> >>  
> >> @@ -274,6 +281,9 @@
> >>  		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> >>  		interrupt-parent = <&intc>;
> >>  
> >> +		clocks = <&hfclk_26m>;
> >> +		clock-names = "fck";
> > 
> > I wonder if we should rename this to hfclk...
> > The DT documentation does not mention it and afaik it is not specified
> > in DT files either.
> > 
> > After all it is the HFCLK clock for the twl4030.
> 
> We should not as it would break compatibility with stable kernels where
> the code expects 'fck' and not hfclk.

OK applying into omap-for-v4.18/dt thanks.

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux