The board uses 26MHz oscillator for the twl4030 HFCLK. This way we will not depend on the bootloader to configure the CFG_BOOT:HFCLK_FREQ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> --- Hi, there might be other boards (all omap3 boards with twl4030?) which uses the same setup, but I only have schematics for beagle-xm. In order for the driver to actually use the clock the [PATCH] mfd: twl-core: Fix clock initialization need to be applied. W/o the twl-core patch the clock is just ignored. Regards, Peter arch/arm/boot/dts/omap3-beagle-xm.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 0349fcc9dc26..d80587de0bbf 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -30,6 +30,13 @@ ethernet = ðernet; }; + /* fixed 26MHz oscillator */ + hfclk_26m: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + leds { compatible = "gpio-leds"; @@ -274,6 +281,9 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + clocks = <&hfclk_26m>; + clock-names = "fck"; + twl_audio: audio { compatible = "ti,twl4030-audio"; codec { -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html