On 2018-04-05 14:52, Peter Ujfalusi wrote:
> The board uses 26MHz oscillator for the twl4030 HFCLK.
> This way we will not depend on the bootloader to configure the
> CFG_BOOT:HFCLK_FREQ
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> ---
> Hi,
>
> there might be other boards (all omap3 boards with twl4030?) which uses the same
> setup, but I only have schematics for beagle-xm.
>
> In order for the driver to actually use the clock the
> [PATCH] mfd: twl-core: Fix clock initialization
> need to be applied. W/o the twl-core patch the clock is just ignored.
>
> Regards,
> Peter
>
> arch/arm/boot/dts/omap3-beagle-xm.dts | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
> index 0349fcc9dc26..d80587de0bbf 100644
> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts
> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
> @@ -30,6 +30,13 @@
> ethernet = ðernet;
> };
>
> + /* fixed 26MHz oscillator */
> + hfclk_26m: oscillator {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <26000000>;
> + };
> +
> leds {
> compatible = "gpio-leds";
>
> @@ -274,6 +281,9 @@
> interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> interrupt-parent = <&intc>;
>
> + clocks = <&hfclk_26m>;
> + clock-names = "fck";
I wonder if we should rename this to hfclk...
The DT documentation does not mention it and afaik it is not specified
in DT files either.
After all it is the HFCLK clock for the twl4030.
I'm fine keeping it as 'fck' but it looks a bit weird.
> +
> twl_audio: audio {
> compatible = "ti,twl4030-audio";
> codec {
>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
