These OpenGL ES GPUs are present in the 7268 and 7278 set top box
chips.
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---
.../bindings/display/brcm,bcm-v3d.txt | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt
new file mode 100644
index 000000000000..1c814714de0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt
@@ -0,0 +1,28 @@
+Broadcom V3D GPU
+
+Only the Broadcom V3D 3.x and newer GPUs are covered by this binding.
+For V3D 2.x, see brcm,bcm-vc4.txt.
+
+Required properties:
+- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d"
+- reg: Physical base addresses and lengths of the register areas
+- reg-names: Names for the register areas. The "hub", "bridge", and "core0"
+ register areas are always required. The "gca" register area
+ is required if the GCA cache controller is present.
+- interrupts: The interrupt numbers. The first interrupt is for the hub,
+ while the following inerrupts are for the cores.
+ See bindings/interrupt-controller/interrupts.txt
+
+Optional properties:
+- clocks: The core clock the unit runs on
+
+v3d {
+ compatible = "brcm,7268-v3d";
+ reg = <0xf1204000 0x100>,
+ <0xf1200000 0x4000>,
+ <0xf1208000 0x4000>,
+ <0xf1204100 0x100>;
+ reg-names = "bridge", "hub", "core0", "gca";
+ interrupts = <0 78 4>,
+ <0 77 4>;
+};
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
