Hi! I'm now following up with one more binding for the unit-converter. This time with a real IC, namely LT6106 from Analog Devices. It's a current sense amplifier. I was a but unsure if I should have the Rin and Rout resistors in the binding or if I instead should have used the "gain". In the end I went with the resistors since while the normal case is an integer gain, that may not always be the case. And when it's not, that could get tricky. But I'm open for arguments on that. Cheers, Peter Peter Rosin (2): dt-bindings: iio: afe: add binding for adi,lt6106 iio: afe: unit-converter: add support for adi,lt6106 .../devicetree/bindings/iio/afe/adi,lt6106.txt | 50 ++++++++++++++++++++ MAINTAINERS | 1 + drivers/iio/afe/Kconfig | 3 +- drivers/iio/afe/iio-unit-converter.c | 54 ++++++++++++++++++++++ 4 files changed, 107 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/iio/afe/adi,lt6106.txt -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
