On Wed, 11 Apr 2018 16:15:53 +0200 Peter Rosin <peda@xxxxxxxxxx> wrote: > Hi! > > I'm now following up with one more binding for the unit-converter. > This time with a real IC, namely LT6106 from Analog Devices. It's > a current sense amplifier. I was a but unsure if I should have > the Rin and Rout resistors in the binding or if I instead should > have used the "gain". In the end I went with the resistors since > while the normal case is an integer gain, that may not always be > the case. And when it's not, that could get tricky. But I'm open > for arguments on that. > > Cheers, > Peter Trivial complaint of the day - why the same title for this email as the previous series? Had me really confused for a minute ;) Seems like the whole driver is stabilizing. If we do a v4 please pull the whole lot into one series. Jonathan > > Peter Rosin (2): > dt-bindings: iio: afe: add binding for adi,lt6106 > iio: afe: unit-converter: add support for adi,lt6106 > > .../devicetree/bindings/iio/afe/adi,lt6106.txt | 50 ++++++++++++++++++++ > MAINTAINERS | 1 + > drivers/iio/afe/Kconfig | 3 +- > drivers/iio/afe/iio-unit-converter.c | 54 ++++++++++++++++++++++ > 4 files changed, 107 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/iio/afe/adi,lt6106.txt > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
