[PATCH v8 2/2] dt-bindings: introduce Command DB for QCOM SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>

Command DB provides information on shared resources like clocks,
regulators etc., probed at boot by the remote subsytem and made
available in shared memory.

Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>
Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Reviewed-by: Evan Green <evgreen@xxxxxxxxxxxx>
---

Changes in v8:
	- Fix node name
	- Add no-map property
Changes in v7:
	- Fix description of 'reg' property

Changes in v6:
	- Move to bindings/reserved-memory
	- Remove indirection address and use only the actual reserved
	  memory

Changes in v4:
	- Fix unwanted capitalization
	- Add reg property
---
 .../bindings/reserved-memory/qcom,cmd-db.txt       | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt

diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
new file mode 100644
index 000000000000..68395530c0a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
@@ -0,0 +1,37 @@
+Command DB
+---------
+
+Command DB is a database that provides a mapping between resource key and the
+resource address for a system resource managed by a remote processor. The data
+is stored in a shared memory region and is loaded by the remote processor.
+
+Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
+controlling shared resources. Depending on the board configuration the shared
+resource properties may change. These properties are dynamically probed by the
+remote processor and made available in the shared memory.
+
+The bindings for Command DB is specified in the reserved-memory section in
+devicetree. The devicetree representation of the command DB driver should be:
+
+Properties:
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: Should be "qcom,cmd-db"
+
+- reg:
+	Usage: required
+	Value type: <prop encoded array>
+	Definition: The register address that points to the actual location of
+		    the Command DB in memory.
+
+Example:
+
+	reserved-memory {
+		[...]
+		reserved-memory@85fe0000 {
+			reg = <0x0 0x85fe0000 0x0 0x20000>;
+			compatible = "qcom,cmd-db";
+			no-map;
+		};
+	};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux