On Tue, Apr 10, 2018 at 7:07 PM, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> wrote:
> PCAL chips ("L" seems to stand for "latched") have additional
> registers starting at address 0x40 to control the latches,
> interrupt mask, pull-up and pull down etc.
>
> The constants are so far defined in a way that they fit for
> the pcal9555a when shifted by the number of banks, i.e. multiplied
> by 2.
>
> Now the pcal6524 has 3 banks which means the relative offset
> must be multiplied by 4 which gives a wrong result if not done
> carefully, since the base offset is already included in the offset.
>
> For the basic registers shared with all pca93xx/tca64xx chips
> there is no such offset.
>
> Therefore, we add code to adjust the register number for exended
> registers to the 24 bit accessor functions.
>
> And we add additional register offset constants (not yet used by
> the driver code) which are specific to the pcal6524.
>
First of all, as I said, please split this to two patches. Don't mix the things.
> + /* adjust register address for pcal6524 */
> + if (reg >= PCAL953X_OUT_STRENGTH)
> + reg -= PCAL953X_OUT_STRENGTH >> 1;
> +
Give me some days to think about it.
--
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
