Hi Pavel,
Thanks for sharing your time on reviewing it. Please see my answers inline.
-Jae
On 3/6/2018 4:40 AM, Pavel Machek wrote:
Hi!
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
---
.../devicetree/bindings/peci/peci-aspeed.txt | 73 ++++++++++++++++++++++
1 file changed, 73 insertions(+)
create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.txt
diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.txt b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
new file mode 100644
index 000000000000..8a86f346d550
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
@@ -0,0 +1,73 @@
+Device tree configuration for PECI buses on the AST24XX and AST25XX SoCs.
Are these SoCs x86-based?
Yes, these are ARM SoCs. Please see Andrew's answer as well.
+Required properties:
+- compatible
+ "aspeed,ast2400-peci" or "aspeed,ast2500-peci"
+ - aspeed,ast2400-peci: Aspeed AST2400 family PECI controller
+ - aspeed,ast2500-peci: Aspeed AST2500 family PECI controller
+
+- reg
+ Should contain PECI registers location and length.
Other dts documents put it on one line, reg: Should contain ...
+- clock_frequency
+ Should contain the operation frequency of PECI hardware module.
+ 187500 ~ 24000000
specify this is Hz?
I'll add a description. Thanks!
+- rd-sampling-point
+ Read sampling point selection. The whole period of a bit time will be
+ divided into 16 time frames. This value will determine which time frame
+ this controller will sample PECI signal for data read back. Usually in
+ the middle of a bit time is the best.
English? "This value will determine when this controller"?
Could I change it like below?:
"This value will determine in which time frame this controller samples
PECI signal for data read back"
+ 0 ~ 15 (default: 8)
+
+- cmd_timeout_ms
+ Command timeout in units of ms.
+ 1 ~ 60000 (default: 1000)
+
+Example:
+ peci: peci@1e78b000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e78b000 0x60>;
+
+ peci0: peci-bus@0 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <15>;
+ clocks = <&clk_clkin>;
+ clock-frequency = <24000000>;
+ msg-timing-nego = <1>;
+ addr-timing-nego = <1>;
+ rd-sampling-point = <8>;
+ cmd-timeout-ms = <1000>;
+ };
+ };
\ No newline at end of file
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
