From: Pengcheng Li <lpc.li@xxxxxxxxxxxxx>
It adds device tree bindings document for HiSilicon INNO USB2 PHY.
Signed-off-by: Pengcheng Li <lpc.li@xxxxxxxxxxxxx>
Signed-off-by: Jiancheng Xue <xuejiancheng@xxxxxxxxxxxxx>
Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
---
.../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 72 ++++++++++++++++++++++
1 file changed, 72 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
new file mode 100644
index 000000000000..4dbf87c70b96
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
@@ -0,0 +1,72 @@
+Device tree bindings for HiSilicon INNO USB2 PHY
+
+Required properties:
+- compatible: Should be one of the following strings:
+ "hisilicon,inno-usb2-phy",
+ "hisilicon,hi3798cv200-usb2-phy".
+- reg: Should be the address space for PHY configuration register in peripheral
+ controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC.
+- clocks: The phandle and clock specifier pair for INNO USB2 PHY device
+ reference clock.
+- resets: The phandle and reset specifier pair for INNO USB2 PHY device reset
+ signal.
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+
+The INNO USB2 PHY device should be a child node of peripheral controller that
+contains the PHY configuration register, and each device suppports up to 2 PHY
+ports which are represented as child nodes of INNO USB2 PHY device.
+
+Required properties for PHY port node:
+- reg: The PHY port instance number.
+- #phy-cells: Defined by generic PHY bindings. Must be 0.
+- resets: The phandle and reset specifier pair for PHY port reset signal.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+
+perictrl: peripheral-controller@8a20000 {
+ compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
+ "simple-mfd";
+ reg = <0x8a20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8a20000 0x1000>;
+
+ usb2_phy1: usb2-phy@120 {
+ compatible = "hisilicon,hi3798cv200-usb2-phy";
+ reg = <0x120 0x4>;
+ clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
+ resets = <&crg 0xbc 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2_phy1_port0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 8>;
+ };
+
+ usb2_phy1_port1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 9>;
+ };
+ };
+
+ usb2_phy2: usb2-phy@124 {
+ compatible = "hisilicon,hi3798cv200-usb2-phy";
+ reg = <0x124 0x4>;
+ clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
+ resets = <&crg 0xbc 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2_phy2_port0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 10>;
+ };
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
