It adds device tree bindings and driver support for HiSilicon INNO USB2 PHY device, which can be found on HiSilicon STB SoC Hi3798CV200. Changes for v4: - Change device tree bindings to define each PHY port as a child node, and therefore instead of adding a custom .of_xlate, we can use of_phy_simple_xlate. Also #phy-cells is 0 now, and consumers can refer to the phy without any number cell in phandle. Changes for v3: - Make combphy device be child of peripheral controller and use 'reg' property for mapping combphy configuration register. Changes for v2: - Move DT bindings into a separate patch. - Rename hisi_inno_phy_start() to hisi_inno_phy_init() for aligning name with .init hook. Pengcheng Li (2): dt-bindings: add bindings doc for HiSilicon INNO USB2 PHY phy: add inno-usb2-phy driver for hi3798cv200 SoC .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 72 ++++++++ drivers/phy/hisilicon/Kconfig | 10 ++ drivers/phy/hisilicon/Makefile | 1 + drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 197 +++++++++++++++++++++ 4 files changed, 280 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt create mode 100644 drivers/phy/hisilicon/phy-hisi-inno-usb2.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
