On Thu, Feb 22, 2018 at 09:38:39AM +0100, Geert Uytterhoeven wrote: > Hi Simon, > > On Wed, Feb 21, 2018 at 7:32 PM, Simon Horman <horms@xxxxxxxxxxxx> wrote: > > On Wed, Feb 21, 2018 at 05:30:12PM +0100, Geert Uytterhoeven wrote: > >> On Wed, Feb 21, 2018 at 5:13 PM, Simon Horman <horms@xxxxxxxxxxxx> wrote: > >> > On Tue, Feb 20, 2018 at 01:51:28PM +0100, Geert Uytterhoeven wrote: > >> >> On Mon, Feb 12, 2018 at 6:44 PM, Fabrizio Castro > >> >> <fabrizio.castro@xxxxxxxxxxxxxx> wrote: > >> >> > this series has been around for some time as RFC, and it has collected > >> >> > useful comments from the community along the way. > >> >> > The solution proposed by this patch set works for most R-Car Gen2 and > >> >> > RZ/G1 devices, but not all of them. We now know that for some R-Car > >> >> > Gen2 early revisions there is no proper software fix. Anyway, no > >> >> > product has been built around early revisions, but development boards > >> >> > mounting early revisions (basically prototypes) are still out there. > >> >> > As a result, this series isn't enabling the internal watchdog on R-Car > >> >> > Gen2 boards, developers may enable it in board specific device trees > >> >> > if needed. > >> >> > This series has been tested by me on the iwg20d, iwg22d, Lager, Alt, > >> >> > and Koelsch boards. > >> >> > > >> >> > The problem > >> >> > =========== > >> >> > To deal with SMP on R-Car Gen2 and RZ/G1, we install a reset vector > >> >> > to ICRAM1 and we program the [S]BAR registers so that when we turn ON > >> >> > the non-boot CPUs they are redirected to the reset vector installed by > >> >> > Linux in ICRAM1, and eventually they continue the execution to RAM, > >> >> > where the SMP bring-up code will take care of the rest. > >> >> > The content of the [S]BAR registers survives a watchdog triggered reset, > >> >> > and as such after the watchdog fires the boot core will try and execute > >> >> > the SMP bring-up code instead of jumping to the bootrom code. > >> >> > > >> >> > The fix > >> >> > ======= > >> >> > The main strategy for the solution is to let the reset vector decide > >> >> > if it needs to jump to shmobile_boot_fn or to the bootrom code. > >> >> > In a watchdog triggered reset scenario, since the [S]BAR registers keep > >> >> > their values, the boot CPU will jump into the newly designed reset > >> >> > vector, the assembly routine will eventually test WOVF (a bit in register > >> >> > RWTCSRA that indicates if the watchdog counter has overflown, the value > >> >> > of this bit gets retained in this scenario), and jump to the bootrom code > >> >> > which will in turn load up the bootloader, etc. > >> >> > When bringing up SMP or using CPU hotplug, the reset vector will jump > >> >> > to shmobile_boot_fn instead. > >> >> > > >> >> > Thank you All for your help. > >> >> > > >> >> > Best regards, > >> >> > > >> >> > Fabrizio Castro (26): > >> >> > ARM: shmobile: Add watchdog support > >> >> > ARM: dts: r8a7743: Adjust SMP routine size > >> >> > ARM: dts: r8a7745: Adjust SMP routine size > >> >> > ARM: dts: r8a7790: Adjust SMP routine size > >> >> > ARM: dts: r8a7791: Adjust SMP routine size > >> >> > ARM: dts: r8a7792: Adjust SMP routine size > >> >> > ARM: dts: r8a7793: Adjust SMP routine size > >> >> > ARM: dts: r8a7794: Adjust SMP routine size > >> >> > soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2 > >> >> > ARM: shmobile: rcar-gen2: Add watchdog support > >> >> > dt-bindings: watchdog: renesas-wdt: Add R-Car Gen2 support > >> >> > watchdog: renesas_wdt: Add R-Car Gen2 support > >> >> > watchdog: renesas_wdt: Add restart handler > >> >> > ARM: shmobile: defconfig: Enable RENESAS_WDT_GEN > >> >> > clk: renesas: r8a7743: Add rwdt clock > >> >> > clk: renesas: r8a7745: Add rwdt clock > >> >> > clk: renesas: r8a7790: Add rwdt clock > >> >> > clk: renesas: r8a7791/r8a7793: Add rwdt clock > >> >> > clk: renesas: r8a7794: Add rwdt clock > >> >> > ARM: dts: r8a7743: Add watchdog support to SoC dtsi > >> >> > ARM: dts: r8a7745: Add watchdog support to SoC dtsi > >> >> > ARM: dts: r8a7790: Add watchdog support to SoC dtsi > >> >> > ARM: dts: r8a7791: Add watchdog support to SoC dtsi > >> >> > ARM: dts: r8a7794: Add watchdog support to SoC dtsi > >> >> > ARM: dts: iwg20m: Add watchdog support to SoM dtsi > >> >> > ARM: dts: iwg22m: Add watchdog support to SoM dtsi > >> >> > > >> >> > .../devicetree/bindings/watchdog/renesas-wdt.txt | 19 ++++++-- > >> >> > arch/arm/boot/dts/r8a7743-iwg20m.dtsi | 5 ++ > >> >> > arch/arm/boot/dts/r8a7743.dtsi | 12 ++++- > >> >> > arch/arm/boot/dts/r8a7745-iwg22m.dtsi | 5 ++ > >> >> > arch/arm/boot/dts/r8a7745.dtsi | 12 ++++- > >> >> > arch/arm/boot/dts/r8a7790.dtsi | 12 ++++- > >> >> > arch/arm/boot/dts/r8a7791.dtsi | 12 ++++- > >> >> > arch/arm/boot/dts/r8a7792.dtsi | 2 +- > >> >> > arch/arm/boot/dts/r8a7793.dtsi | 2 +- > >> >> > arch/arm/boot/dts/r8a7794.dtsi | 12 ++++- > >> >> > arch/arm/configs/shmobile_defconfig | 1 + > >> >> > arch/arm/mach-shmobile/common.h | 6 +++ > >> >> > arch/arm/mach-shmobile/headsmp.S | 55 ++++++++++++++++++++++ > >> >> > arch/arm/mach-shmobile/platsmp-apmu.c | 1 + > >> >> > arch/arm/mach-shmobile/pm-rcar-gen2.c | 15 ++++-- > >> >> > drivers/clk/renesas/r8a7743-cpg-mssr.c | 2 + > >> >> > drivers/clk/renesas/r8a7745-cpg-mssr.c | 2 + > >> >> > drivers/clk/renesas/r8a7790-cpg-mssr.c | 2 + > >> >> > drivers/clk/renesas/r8a7791-cpg-mssr.c | 2 + > >> >> > drivers/clk/renesas/r8a7794-cpg-mssr.c | 2 + > >> >> > drivers/soc/renesas/rcar-rst.c | 35 +++++++++++--- > >> >> > drivers/watchdog/renesas_wdt.c | 39 +++++++++++++-- > >> >> > >> >> Thanks, I've queued the clock patches in clk-renesas-for-v4.17, as they are > >> >> a hard dependency for: > >> >> (1) The new reset vector in arch/arm/mach-shmobile/ > >> >> (2) The watchdog driver. > >> >> > >> >> Note that the watchdog driver itself (2) has a hard dependency on the > >> >> new reset vector (1). > >> > > >> > Thanks, I have marked the watchdog driver patch as Deferred. > >> > Please resubmit or otherwise ping me once they dependencies > >> > are in an rc release. > >> > >> I gave the dependencies a bit more thought. > >> > >> I think we can gain once release cycle if you would postpone the DTS patches > >> (both SMP routine size adjustments and RWDT device node additions) to v4.18. > >> Then all other parts can be upstreamed in parallel in v4.17, as nothing > >> will be activated before the DTS parts are in. > >> > >> Does this look sane? > > > > What about new DTS on old kernels of a specific vintage? > > New DTS would work fine on v4.16 and older, which don't have any of the > other patches from this series. > New DTS would work fine on v4.17, assumed all other patches from this > series get into v4.17. > > The only issue would be a new DTS on a kernel that has some but not all > other patches from this series. Thanks for the analysis. I think this is the key point. What is the risk of that happening? > If we want to fast-track everything into v4.17, we need a stable branch, to be > pulled by all 5 actors (clk-renesas, mach-shmobile, soc-renesas, watchdog, > renesas-dts). It seems that watchdog is the only item on that list that neither you nor I sign off on. So I conclude that if the watchdog patch goes in early enough in the cycle then we ought to be in good shape. None the less, is it worth the risk? -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
