Hi, On Mon, 29 Jan 2018 13:49:14 -0800 Randy Dunlap <rdunlap@xxxxxxxxxxxxx> wrote: > On 01/29/2018 01:21 AM, Yong Deng wrote: > > Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2 > > interface and CSI1 is used for parallel interface. This is not > > documented in datasheet but by test and guess. > > > > This patch implement a v4l2 framework driver for it. > > > > Currently, the driver only support the parallel interface. MIPI-CSI2, > > ISP's support are not included in this patch. > > > > Tested-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> > > Signed-off-by: Yong Deng <yong.deng@xxxxxxxxxxxx> > > --- > > > A previous version (I think v6) had a build error with the use of > PHYS_OFFSET, so Kconfig was modified to depend on ARM and ARCH_SUNXI > (one of which seems to be overkill). As is here, the COMPILE_TEST piece is > meaningless for all arches except ARM. If you care enough for COMPILE_TEST > (and I would), then you could make COMPILE_TEST useful on any arch by > removing the "depends on ARM" (the ARCH_SUNXI takes care of that) and by > having an alternate value for PHYS_OFFSET, like so: > > +#if defined(CONFIG_COMPILE_TEST) && !defined(PHYS_OFFSET) > +#define PHYS_OFFSET 0 > +#endif > > With those 2 changes, the driver builds for me on x86_64. I have considered this method. But it's so sick to put these code in dirver (for my own). I mean this is meaningless for the driver itself and make people confused. I grepped the driver/ code and I found many drivers writing Kconfig like this. For example: ARM && COMPILE_TEST MIPS && COMPILE_TEST PPC64 && COMPILE_TEST BTW, for my own, I do not care about COMPILE_TEST. > > > diff --git a/drivers/media/platform/sunxi/sun6i-csi/Kconfig b/drivers/media/platform/sunxi/sun6i-csi/Kconfig > > new file mode 100644 > > index 0000000..f80c965 > > --- /dev/null > > +++ b/drivers/media/platform/sunxi/sun6i-csi/Kconfig > > @@ -0,0 +1,10 @@ > > +config VIDEO_SUN6I_CSI > > + tristate "Allwinner V3s Camera Sensor Interface driver" > > + depends on ARM > > + depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API && HAS_DMA > > + depends on ARCH_SUNXI || COMPILE_TEST > > + select VIDEOBUF2_DMA_CONTIG > > + select REGMAP_MMIO > > + select V4L2_FWNODE > > + ---help--- > > + Support for the Allwinner Camera Sensor Interface Controller on V3s. > > thanks, > -- > ~Randy Thanks, Yong -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
