On Mon, Jan 29, 2018 at 10:49 PM, Randy Dunlap <rdunlap@xxxxxxxxxxxxx> wrote:
> On 01/29/2018 01:21 AM, Yong Deng wrote:
>> Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2
>> interface and CSI1 is used for parallel interface. This is not
>> documented in datasheet but by test and guess.
>>
>> This patch implement a v4l2 framework driver for it.
>>
>> Currently, the driver only support the parallel interface. MIPI-CSI2,
>> ISP's support are not included in this patch.
>>
>> Tested-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
>> Signed-off-by: Yong Deng <yong.deng@xxxxxxxxxxxx>
>> ---
>
>
> A previous version (I think v6) had a build error with the use of
> PHYS_OFFSET, so Kconfig was modified to depend on ARM and ARCH_SUNXI
> (one of which seems to be overkill). As is here, the COMPILE_TEST piece is
> meaningless for all arches except ARM. If you care enough for COMPILE_TEST
> (and I would), then you could make COMPILE_TEST useful on any arch by
> removing the "depends on ARM" (the ARCH_SUNXI takes care of that) and by
> having an alternate value for PHYS_OFFSET, like so:
>
> +#if defined(CONFIG_COMPILE_TEST) && !defined(PHYS_OFFSET)
> +#define PHYS_OFFSET 0
> +#endif
>
> With those 2 changes, the driver builds for me on x86_64.
I think the PHYS_OFFSET really has to get removed from the driver, it's
wrong on ARM as well.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
