From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx> Add device-tree bindings for Microcip CanFD Controller mcp2517fd Signed-off-by: Martin Sperl <kernel@xxxxxxxxxxxxxxxx> --- Changelog: V1 -> V2: new more generic name based on feedback from microchip cleanup of dt custom properties removing (most) gpio functions --- .../bindings/net/can/microchip,mcp25xxfd.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.txt diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.txt new file mode 100644 index 000000000000..691dd6220bd7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.txt @@ -0,0 +1,29 @@ +* Microchip MCP2517 stand-alone CAN controller device tree bindings + +Required properties: + - compatible: Should be one of the following: + - "microchip,mcp2517fd" for MCP2517fd. + - reg: SPI chip select. + - clocks: The clock feeding the CAN controller. + - interrupt-parent: The parent interrupt controller. + - interrupts: Should contain IRQ line for the CAN controller. + +Optional properties: + - vdd-supply: Regulator that powers the CAN controller. + - xceiver-supply: Regulator that powers the CAN transceiver. + - microchip,clock_out_div = <0|1|2|4|10>: Clock output pin divider + 0 = Start of Frame output + default: 10 + - microchip,clock_div2: bool: divide the internal clock by 2 + - gpio_opendrain: bool: enable open-drain for all pins (except cantx) + +Example: + can0: can@1 { + compatible = "microchip,mcp2515"; + reg = <1>; + clocks = <&clk24m>; + interrupt-parent = <&gpio4>; + interrupts = <13 0x8>; + vdd-supply = <®5v0>; + xceiver-supply = <®5v0>; + }; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html