2018-01-12 11:08 GMT+01:00 William Wu <william.wu@xxxxxxxxxxxxxx>: > Add USB3 OTG reset for Type-C PHY. It can be used to hold the USB3 > OTG controller in reset state before initializing the Type-C PHY. > > Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx> > --- > arch/arm64/boot/dts/rockchip/rk3399.dtsi | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi > index d340b58a..4e89d00 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi > @@ -1377,8 +1377,9 @@ > power-domains = <&power RK3399_PD_TCPD0>; > resets = <&cru SRST_UPHY0>, > <&cru SRST_UPHY0_PIPE_L00>, > - <&cru SRST_P_UPHY0_TCPHY>; > - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; > + <&cru SRST_P_UPHY0_TCPHY>, > + <&cru SRST_A_USB3_OTG0>; > + reset-names = "uphy", "uphy-pipe", "uphy-tcphy", "usb3-otg"; > rockchip,grf = <&grf>; > rockchip,typec-conn-dir = <0xe580 0 16>; > rockchip,usb3tousb2-en = <0xe580 3 19>; > @@ -1406,8 +1407,9 @@ > power-domains = <&power RK3399_PD_TCPD1>; > resets = <&cru SRST_UPHY1>, > <&cru SRST_UPHY1_PIPE_L00>, > - <&cru SRST_P_UPHY1_TCPHY>; > - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; > + <&cru SRST_P_UPHY1_TCPHY>, > + <&cru SRST_A_USB3_OTG1>; > + reset-names = "uphy", "uphy-pipe", "uphy-tcphy", "usb3-otg"; > rockchip,grf = <&grf>; > rockchip,typec-conn-dir = <0xe58c 0 16>; > rockchip,usb3tousb2-en = <0xe58c 3 19>; > -- > 2.0.0 > > Tested-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
