Add USB3 OTG reset for Type-C PHY. It can be used to hold the USB3 OTG controller in reset state before initializing the Type-C PHY. Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index d340b58a..4e89d00 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1377,8 +1377,9 @@ power-domains = <&power RK3399_PD_TCPD0>; resets = <&cru SRST_UPHY0>, <&cru SRST_UPHY0_PIPE_L00>, - <&cru SRST_P_UPHY0_TCPHY>; - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; + <&cru SRST_P_UPHY0_TCPHY>, + <&cru SRST_A_USB3_OTG0>; + reset-names = "uphy", "uphy-pipe", "uphy-tcphy", "usb3-otg"; rockchip,grf = <&grf>; rockchip,typec-conn-dir = <0xe580 0 16>; rockchip,usb3tousb2-en = <0xe580 3 19>; @@ -1406,8 +1407,9 @@ power-domains = <&power RK3399_PD_TCPD1>; resets = <&cru SRST_UPHY1>, <&cru SRST_UPHY1_PIPE_L00>, - <&cru SRST_P_UPHY1_TCPHY>; - reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; + <&cru SRST_P_UPHY1_TCPHY>, + <&cru SRST_A_USB3_OTG1>; + reset-names = "uphy", "uphy-pipe", "uphy-tcphy", "usb3-otg"; rockchip,grf = <&grf>; rockchip,typec-conn-dir = <0xe58c 0 16>; rockchip,usb3tousb2-en = <0xe58c 3 19>; -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
