On Sun, 2018-01-14 at 12:37 +0000, Jonathan Cameron wrote:
> On Wed, 10 Jan 2018 13:29:54 +0200
> <alexandru.ardelean@xxxxxxxxxx> wrote:
>
> > From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> >
> > According to the datasheet:
> > * 0 - external crystal, connected from pin MCLK1 to MCLK2
>
> What frequency of crystal? My quick read of the datasheet
> implies this may be flexible. Possibly as flexible as
> the clock option...
I think you're right about this.
Will re-visit this.
Is it ok if I re-spin this as a standalone patch ?
Since I'm new around here, maybe it would probably be good to try to
send one patch at a time and resolve synchronization [between what I
deliver vs recommended ways of doing things].
>
>
> > * 1 - external clock, applied to MCLK2 pin
> > * 2 - internal 4.92 Mhz clock; pin MCLK2 is tristated
> > * 3 - internal 4.92 Mhz clock; internal clock is available on MCLK2
> >
> > Which means that the external clock value only has sense
> > for value 1 (AD7192_CLK_EXT_MCLK2).
> >
> > Also added range validation for the external frequency
> > setting, which the datasheet mentions that it's
> > between 2.4576 and 5.12 Mhz.
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> > ---
> > drivers/staging/iio/adc/ad7192.c | 22 +++++++++++++++-------
> > 1 file changed, 15 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/staging/iio/adc/ad7192.c
> > b/drivers/staging/iio/adc/ad7192.c
> > index 7f204013d6d4..7bc04101d133 100644
> > --- a/drivers/staging/iio/adc/ad7192.c
> > +++ b/drivers/staging/iio/adc/ad7192.c
> > @@ -141,6 +141,8 @@
> > #define AD7192_GPOCON_P1DAT BIT(1) /* P1 state */
> > #define AD7192_GPOCON_P0DAT BIT(0) /* P0 state */
> >
> > +#define AD7192_EXT_FREQ_MHZ_MIN 2457600
> > +#define AD7192_EXT_FREQ_MHZ_MAX 5120000
> > #define AD7192_INT_FREQ_MHZ 4915200
> >
> > /* NOTE:
> > @@ -217,6 +219,12 @@ static int ad7192_calibrate_all(struct
> > ad7192_state *st)
> > ARRAY_SIZE(ad7192_calib_arr));
> > }
> >
> > +static inline bool ad7192_valid_external_frequency(u32 freq)
> > +{
> > + return (freq >= AD7192_EXT_FREQ_MHZ_MIN &&
> > + freq <= AD7192_EXT_FREQ_MHZ_MAX);
> > +}
> > +
> > static int ad7192_setup(struct ad7192_state *st,
> > const struct ad7192_platform_data *pdata)
> > {
> > @@ -245,16 +253,16 @@ static int ad7192_setup(struct ad7192_state
> > *st,
> >
> > switch (pdata->clock_source_sel) {
> > case AD7192_CLK_EXT_MCLK1_2:
> > - case AD7192_CLK_EXT_MCLK2:
> > - st->mclk = AD7192_INT_FREQ_MHZ;
> > - break;
> > case AD7192_CLK_INT:
> > case AD7192_CLK_INT_CO:
> > - if (pdata->ext_clk_hz)
> > - st->mclk = pdata->ext_clk_hz;
> > - else
> > - st->mclk = AD7192_INT_FREQ_MHZ;
> > + st->mclk = AD7192_INT_FREQ_MHZ;
> > break;
> > + case AD7192_CLK_EXT_MCLK2:
> > + if (ad7192_valid_external_frequency(pdata-
> > >clock_source_sel)) {
> > + st->mclk = pdata->clock_source_sel;
> > + break;
> > + }
> > + /* FALLTHROUGH */
> > default:
> > ret = -EINVAL;
> > goto out;
>
> ��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
