On Wed, 17 Jan 2018 07:45:35 +0000
"Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx> wrote:
> On Sun, 2018-01-14 at 12:37 +0000, Jonathan Cameron wrote:
> > On Wed, 10 Jan 2018 13:29:54 +0200
> > <alexandru.ardelean@xxxxxxxxxx> wrote:
> >
> > > From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> > >
> > > According to the datasheet:
> > > * 0 - external crystal, connected from pin MCLK1 to MCLK2
> >
> > What frequency of crystal? My quick read of the datasheet
> > implies this may be flexible. Possibly as flexible as
> > the clock option...
>
> I think you're right about this.
> Will re-visit this.
>
> Is it ok if I re-spin this as a standalone patch ?
>
> Since I'm new around here, maybe it would probably be good to try to
> send one patch at a time and resolve synchronization [between what I
> deliver vs recommended ways of doing things].
Sure, though that may slow things down as I tend to only get fully
caught up with IIO stuff at the weekends.
Certainly don't send more than one patch for similar issues if you
have any doubts about them, but several different issues at once is fine.
Jonathan
>
> >
> >
> > > * 1 - external clock, applied to MCLK2 pin
> > > * 2 - internal 4.92 Mhz clock; pin MCLK2 is tristated
> > > * 3 - internal 4.92 Mhz clock; internal clock is available on MCLK2
> > >
> > > Which means that the external clock value only has sense
> > > for value 1 (AD7192_CLK_EXT_MCLK2).
> > >
> > > Also added range validation for the external frequency
> > > setting, which the datasheet mentions that it's
> > > between 2.4576 and 5.12 Mhz.
> > >
> > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> > > ---
> > > drivers/staging/iio/adc/ad7192.c | 22 +++++++++++++++-------
> > > 1 file changed, 15 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/drivers/staging/iio/adc/ad7192.c
> > > b/drivers/staging/iio/adc/ad7192.c
> > > index 7f204013d6d4..7bc04101d133 100644
> > > --- a/drivers/staging/iio/adc/ad7192.c
> > > +++ b/drivers/staging/iio/adc/ad7192.c
> > > @@ -141,6 +141,8 @@
> > > #define AD7192_GPOCON_P1DAT BIT(1) /* P1 state */
> > > #define AD7192_GPOCON_P0DAT BIT(0) /* P0 state */
> > >
> > > +#define AD7192_EXT_FREQ_MHZ_MIN 2457600
> > > +#define AD7192_EXT_FREQ_MHZ_MAX 5120000
> > > #define AD7192_INT_FREQ_MHZ 4915200
> > >
> > > /* NOTE:
> > > @@ -217,6 +219,12 @@ static int ad7192_calibrate_all(struct
> > > ad7192_state *st)
> > > ARRAY_SIZE(ad7192_calib_arr));
> > > }
> > >
> > > +static inline bool ad7192_valid_external_frequency(u32 freq)
> > > +{
> > > + return (freq >= AD7192_EXT_FREQ_MHZ_MIN &&
> > > + freq <= AD7192_EXT_FREQ_MHZ_MAX);
> > > +}
> > > +
> > > static int ad7192_setup(struct ad7192_state *st,
> > > const struct ad7192_platform_data *pdata)
> > > {
> > > @@ -245,16 +253,16 @@ static int ad7192_setup(struct ad7192_state
> > > *st,
> > >
> > > switch (pdata->clock_source_sel) {
> > > case AD7192_CLK_EXT_MCLK1_2:
> > > - case AD7192_CLK_EXT_MCLK2:
> > > - st->mclk = AD7192_INT_FREQ_MHZ;
> > > - break;
> > > case AD7192_CLK_INT:
> > > case AD7192_CLK_INT_CO:
> > > - if (pdata->ext_clk_hz)
> > > - st->mclk = pdata->ext_clk_hz;
> > > - else
> > > - st->mclk = AD7192_INT_FREQ_MHZ;
> > > + st->mclk = AD7192_INT_FREQ_MHZ;
> > > break;
> > > + case AD7192_CLK_EXT_MCLK2:
> > > + if (ad7192_valid_external_frequency(pdata-
> > > >clock_source_sel)) {
> > > + st->mclk = pdata->clock_source_sel;
> > > + break;
> > > + }
> > > + /* FALLTHROUGH */
> > > default:
> > > ret = -EINVAL;
> > > goto out;
> >
> >
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
