On Mon, 01 Jan 2018, Paul Cercueil wrote:
> This header contains macros for the registers that are present in the
> regmap shared by all the drivers related to the TCU (Timer Counter Unit)
> of the Ingenic JZ47xx SoCs.
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
> include/linux/mfd/syscon/ingenic-tcu.h | 57 ++++++++++++++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
> create mode 100644 include/linux/mfd/syscon/ingenic-tcu.h
>
> v2: Use SPDX identifier for the license
>
> diff --git a/include/linux/mfd/syscon/ingenic-tcu.h b/include/linux/mfd/syscon/ingenic-tcu.h
> new file mode 100644
> index 000000000000..5962165e1309
> --- /dev/null
> +++ b/include/linux/mfd/syscon/ingenic-tcu.h
> @@ -0,0 +1,57 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Header file for the Ingenic JZ47xx TCU driver
> + */
> +#ifndef __LINUX_CLK_INGENIC_TCU_H_
> +#define __LINUX_CLK_INGENIC_TCU_H_
> +
> +#include <linux/bitops.h>
> +#include <linux/regmap.h>
> +
> +enum ingenic_tcu_reg {
> + REG_WDT_TDR = 0x00,
> + REG_WDT_TCER = 0x04,
> + REG_WDT_TCNT = 0x08,
> + REG_WDT_TCSR = 0x0c,
> + REG_TER = 0x10,
> + REG_TESR = 0x14,
> + REG_TECR = 0x18,
> + REG_TSR = 0x1c,
> + REG_TFR = 0x20,
> + REG_TFSR = 0x24,
> + REG_TFCR = 0x28,
> + REG_TSSR = 0x2c,
> + REG_TMR = 0x30,
> + REG_TMSR = 0x34,
> + REG_TMCR = 0x38,
> + REG_TSCR = 0x3c,
> + REG_TDFR0 = 0x40,
> + REG_TDHR0 = 0x44,
> + REG_TCNT0 = 0x48,
> + REG_TCSR0 = 0x4c,
> + REG_OST_DR = 0xe0,
> + REG_OST_CNTL = 0xe4,
> + REG_OST_CNTH = 0xe8,
> + REG_OST_TCSR = 0xec,
> + REG_TSTR = 0xf0,
> + REG_TSTSR = 0xf4,
> + REG_TSTCR = 0xf8,
> + REG_OST_CNTHBUF = 0xfc,
> +};
I don't see a need to have declare these as enums.
> +#define TCSR_RESERVED_BITS 0x3f
> +#define TCSR_PARENT_CLOCK_MASK 0x07
> +#define TCSR_PRESCALE_LSB 3
> +#define TCSR_PRESCALE_MASK 0x38
> +
> +#define TCSR_PWM_SD BIT(9) /* 0: Shutdown abruptly 1: gracefully */
> +#define TCSR_PWM_INITL_HIGH BIT(8) /* Sets the initial output level */
> +#define TCSR_PWM_EN BIT(7) /* PWM pin output enable */
> +
> +#define CHANNEL_STRIDE 0x10
> +#define REG_TDFRc(c) (REG_TDFR0 + ((c) * CHANNEL_STRIDE))
> +#define REG_TDHRc(c) (REG_TDHR0 + ((c) * CHANNEL_STRIDE))
> +#define REG_TCNTc(c) (REG_TCNT0 + ((c) * CHANNEL_STRIDE))
> +#define REG_TCSRc(c) (REG_TCSR0 + ((c) * CHANNEL_STRIDE))
It'd be a good idea to namespace all of these pre-processed definitions.
> +#endif /* __LINUX_CLK_INGENIC_TCU_H_ */
--
Lee Jones
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
