Hi, This series contains fixes and enhancements for Atmel/Microchip boards, mainly for SoM1-EK board, SAMA5D2 Xplained board and SAM9x5 boards. Please accept them for 4.15. Thank you, Claudiu Beznea Changes since v1: - correct author for some patches; these were developed first on internal branch and then were manualy ported by me to Linux public tree (since the device tree files are different) but then I forgot to keep the real author - removed patch "ARM: dts: at91: sama5d2_xplained: Add charger node of pmic." from this series since it was already applied on at91-dt branch (see [1]) [1] https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git/commit/?h=at91-dt&id=4b6ad41f267b8ddabf5dd1b02a318bc74f0b95e9 Claudiu Beznea (14): ARM: dts: at91: sama5d27_som1_ek: add disabled/okay status ARM: dts: at91: sama5d27_som1_ek: update serial aliases ARM: dts: at91: sama5d27_som1_ek: set USER button as a wakeup source ARM: dts: at91: sama5d27_som1_ek: add aliases for i2c ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0 ARM: dts: at91: sama5d27_som1_ek: remove not connected CAN0 ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC lines ARM: dts: at91: sama5d2_xplained: Add charger node of pmic. ARM: dts: at91: sama5d2_xplained: set PB_USER as wakeup source ARM: dts: at91: sama5d2_xplained: add pinmuxing for pwm0 ARM: dts: at91: sama5d2_xplained: remove pull-up on SD/MMC lines ARM: dts: at91: at91sam9x25ek: add CAN1 interface ARM: dts: at91: at91sam9x25ek: add pwm0 ARM: dts: at91: at91sam9x5ek: use DMA for USART0 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 46 ++++++++++++++--------------- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 39 ++++++++++++++++-------- arch/arm/boot/dts/at91sam9x25ek.dts | 10 +++++++ arch/arm/boot/dts/at91sam9x5ek.dtsi | 2 ++ 4 files changed, 62 insertions(+), 35 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
