Hi Wenyou, On 10.10.2017 03:39, Yang, Wenyou wrote: > Hi Claudiu, > > > On 2017/10/10 0:09, Claudiu Beznea wrote: >> Add charger device node as a sub-device node of act8945a mfd, move >> the charger's properties to this node, and use the "interrupts" >> property to replace "active-semi,irq_gpios" to denote the act8945a >> charger's irq. >> >> Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx> >> [claudiu.beznea@xxxxxxxxxxxxx: replace numbers with pin macros] >> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> > This patch has already applied on at91-dt branch. > https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git/commit/?h=at91-dt&id=4b6ad41f267b8ddabf5dd1b02a318bc74f0b95e9 > Thanks, I will remove it from v2. >> --- >> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 23 +++++++++++++++-------- >> 1 file changed, 15 insertions(+), 8 deletions(-) >> >> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts >> index c7e9ccf2bc87..848ca1b025be 100644 >> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts >> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts >> @@ -160,14 +160,6 @@ >> compatible = "active-semi,act8945a"; >> reg = <0x5b>; >> active-semi,vsel-high; >> - active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>; >> - active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>; >> - active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>; >> - active-semi,input-voltage-threshold-microvolt = <6600>; >> - active-semi,precondition-timeout = <40>; >> - active-semi,total-timeout = <3>; >> - pinctrl-names = "default"; >> - pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; >> status = "okay"; >> regulators { >> @@ -220,6 +212,21 @@ >> regulator-always-on; >> }; >> }; >> + >> + charger { >> + compatible = "active-semi,act8945a-charger"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; >> + interrupt-parent = <&pioA>; >> + interrupts = <PIN_PB13 GPIO_ACTIVE_LOW>; >> + >> + active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>; >> + active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>; >> + active-semi,input-voltage-threshold-microvolt = <6600>; >> + active-semi,precondition-timeout = <40>; >> + active-semi,total-timeout = <3>; >> + status = "okay"; >> + }; >> }; >> }; >> > > Best Regards, > Wenyou Yang -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
