On Fri, Oct 06, 2017 at 08:28:52PM +0300, Vladimir Barinov wrote:
> Hi Geert,
>
> On 06.10.2017 10:15, Geert Uytterhoeven wrote:
> >Hi Vladimir,
> >
> >CC Shimoda-san
> >
> >On Fri, Oct 6, 2017 at 4:38 AM, Vladimir Barinov
> ><vladimir.barinov@xxxxxxxxxxxxxxxxxx> wrote:
> >>On 20.09.2017 15:59, Geert Uytterhoeven wrote:
> >>>On Thu, Sep 7, 2017 at 12:36 AM, Vladimir Barinov
> >>><vladimir.barinov@xxxxxxxxxxxxxxxxxx> wrote:
> >>>>This supports USB2 PHY channel #0 on ULCB Kingfisher board
> >>>>
> >>>>Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
> >>>Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> >>>
> >>>>index ca8de1a..0854600 100644
> >>>>--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> >>>>+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> >>>>@@ -60,6 +60,11 @@
> >>>> groups = "scif1_data_b";
> >>>> function = "scif1";
> >>>> };
> >>>>+
> >>>>+ usb0_pins: usb0 {
> >>>>+ groups = "usb0";
> >>>>+ function = "usb0";
> >>>>+ };
> >>>> };
> >>>>
> >>>> &scif1 {
> >>>>@@ -68,3 +73,10 @@
> >>>>
> >>>> status = "okay";
> >>>> };
> >>>>+
> >>>>+&usb2_phy0 {
> >>>>+ pinctrl-0 = <&usb0_pins>;
> >>>>+ pinctrl-names = "default";
> >>>>+
> >>>Don't you need
> >>>
> >>> vbus-supply = <&vbus0_usb2>;
> >>>
> >>>with vbus0_usb2 a fixed regulator controlled by GPIO P11 (OTG_EXTLPn) from
> >>>GPIO expander U11 (TCA9539)?
> >>>May be optional, though. salvator-common.dtsi has it.
> >>Yes, I need this gpio.
> >>I need both OTG_EXTLPn and OTG_OFFVBUSn from the same gpio expander.
> >>
> >>I've been considering to use either vbus-supply + gpio hog or use gpio hog
> >>for both of them for consistency.
> >>What do you think about this?
> >For OTG_EXTLPn you don't really need a hog, as it will be controlled by the
> >USB driver/subsystem, like on Salvator-X(S), right?
> Agreed.
> >
> >For OTG_OFFVBUSn, which is (optionally) driven from USB0_PWEN on
> >Salvator-X(S) I don't know if you need a GPIO hog or not. I have to defer your
> >question to Shimoda-san.
> This pin should be tied permanently low to disable internal MAX3355 internal
> VBUS charge pump.
> Hence probably gpio hog is enough for OTG_OFFVBUSn.
>
> KF has dedicated VBUS power supply controlled by USB0_PWEN.
Hi,
I am expecting an updated version of this patch.
Please post it in a fresh thread.
I have gone through the entire patch-set and applied everything that I
though was appropriate. If I have missed any then please repost them as
well, in a fresh patch-set.
Thanks!
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
