2017-09-04 15:58 GMT+09:00 Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>: > This series adds thermal nodes for UniPhier PXs2 and LD20 SoCs. > > Resending the patches to apply the missing comments, > please ignore previous v4. > > Changes since v3: > - use the dt-bindings header to replace the limit values with THERMAL_NO_LIMIT > - add the calibration value to uniphier-pxs2.dtsi > - move the calibration value to uniphier-ld20.dtsi > > Changes since v2: > - add the calibration value to device tree for LD20 reference board > > Changes since v1: > - separate from driver's patchset[1] > - add cooling-maps nodes on the device tree > - fix an interrupt trigger to set 'level-triggered' according to > hardware specification > - bring up threshold temperature for LD20 according to the spec sheet > - add cpuN labels for reference in cooling-device property on PXs2 dts > > [1] https://lkml.org/lkml/2017/6/28/170 > > Kunihiko Hayashi (2): > ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for > PXs2 > arm64: dts: uniphier: add nodes of thermal monitor and thermal zone > for LD20 > > arch/arm/boot/dts/uniphier-pxs2.dtsi | 47 ++++++++++++++++++++++-- > arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 45 +++++++++++++++++++++++ > 2 files changed, 88 insertions(+), 4 deletions(-) > Series, applied to linux-uniphier. Thanks! -- Best Regards Masahiro Yamada -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
