2017-09-18 21:10 GMT+09:00 Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>: > 2017-09-04 15:58 GMT+09:00 Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>: >> This series adds thermal nodes for UniPhier PXs2 and LD20 SoCs. >> >> Resending the patches to apply the missing comments, >> please ignore previous v4. >> >> Changes since v3: >> - use the dt-bindings header to replace the limit values with THERMAL_NO_LIMIT >> - add the calibration value to uniphier-pxs2.dtsi >> - move the calibration value to uniphier-ld20.dtsi >> >> Changes since v2: >> - add the calibration value to device tree for LD20 reference board >> >> Changes since v1: >> - separate from driver's patchset[1] >> - add cooling-maps nodes on the device tree >> - fix an interrupt trigger to set 'level-triggered' according to >> hardware specification >> - bring up threshold temperature for LD20 according to the spec sheet >> - add cpuN labels for reference in cooling-device property on PXs2 dts >> >> [1] https://lkml.org/lkml/2017/6/28/170 >> >> Kunihiko Hayashi (2): >> ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for >> PXs2 >> arm64: dts: uniphier: add nodes of thermal monitor and thermal zone >> for LD20 >> >> arch/arm/boot/dts/uniphier-pxs2.dtsi | 47 ++++++++++++++++++++++-- >> arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 45 +++++++++++++++++++++++ >> 2 files changed, 88 insertions(+), 4 deletions(-) >> > > Series, applied to linux-uniphier. Thanks! > > -- > Best Regards > Masahiro Yamada Both of the patches added W=2 warnings by '_' in the node names. I fixed them up locally, per Rob's comment: https://patchwork.kernel.org/patch/9988355/ -- Best Regards Masahiro Yamada -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
