On Thu, 2017-09-14 at 17:28 +0300, Eugeniy Paltsev wrote: > ARC AXS10x boards support custom IP-block which allows to control > reset signals of selected peripherals. For example DW GMAC, etc... > This block is controlled via memory-mapped register (AKA CREG) which > represents up-to 32 reset lines. This regiter is self-clearing so we > don't need to deassert line after reset. > > As of today only the following lines are used: > - DW GMAC - line 5 > > > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx> > --- > Changes v1 -> v2: > * The creg reset register is self-clearing so we don't need to clear it > manually. Fixed it. > * Use reset callback instead of assert/deassert pair. > * Rename reset node in documentation to "reset-controller" for consistency > with the other bindings. > * Use devm_reset_controller_register instead of reset_controller_register > > NOTE: > This driver couldn't be replaced by reset-simple driver as we mustn't > read from reset register or clear it. Thanks, I've applied this patch to the reset/next branch. regards Philipp -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
