Re: [PATCH v2 2/3] dt-binding: net: sfp binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Sergei,

On Wed, Aug 30, 2017 at 02:15:32PM +0300, Sergei Shtylyov wrote:
> On 8/30/2017 2:11 PM, Baruch Siach wrote:
> 
> > On Wed, Aug 30, 2017 at 02:04:11PM +0300, Sergei Shtylyov wrote:
> > > On 8/30/2017 12:51 PM, Baruch Siach wrote:
> > > 
> > > > Add device-tree binding documentation SFP transceivers. Support for SFP
> > > > transceivers has been recently introduced (drivers/net/phy/sfp.c).
> > > > 
> > > > Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx>
> > > > ---
> > > > v2:
> > > >     Rename -gpio properties to -gpios
> > > >     Rename the rate-select-gpio property to rate-select0-gpios
> > > >     Add the rate-select1-gpios property
> > > >     Add examples
> > > > ---
> > > >    Documentation/devicetree/bindings/net/sff,sfp.txt | 74 +++++++++++++++++++++++
> > > >    1 file changed, 74 insertions(+)
> > > >    create mode 100644 Documentation/devicetree/bindings/net/sff,sfp.txt
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt
> > > > new file mode 100644
> > > > index 000000000000..1d9c786d6287
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/net/sff,sfp.txt
> > > > @@ -0,0 +1,74 @@
> > > > +Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP)
> > > > +Transceiver
> > > > +
> > > > +Required properties:
> > > > +
> > > > +- compatible : must be "sff,sfp"
> > > > +
> > > > +Optional Properties:
> > > > +
> > > > +- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial
> > > > +  interface
> > > > +
> > > > +- moddef0-gpios : phandle of the MOD-DEF0 (AKA Mod_ABS) module presence input
> > > > +  gpio signal
> > > 
> > >     Your example shows there's GPIO phandle *and* specifier.
> > 
> > Would "GPIO specifier" be enough here?
> 
>    No, specifier is the cells following GPIO (or any other) phandle.

So this should be "GPIO phandle and specifier of ...", is that correct?

I have found very few (< 4) occurrences of this language in (lots of) '-gpios' 
property descriptions under Documentation/devicetree/bindings/. Is this a new 
requirement?

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@xxxxxxxxxx - tel: +972.52.368.4656, http://www.tkos.co.il -
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux