Hi Sergei, Thanks for reviewing. On Wed, Aug 30, 2017 at 02:04:11PM +0300, Sergei Shtylyov wrote: > On 8/30/2017 12:51 PM, Baruch Siach wrote: > > > Add device-tree binding documentation SFP transceivers. Support for SFP > > transceivers has been recently introduced (drivers/net/phy/sfp.c). > > > > Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx> > > --- > > v2: > > Rename -gpio properties to -gpios > > Rename the rate-select-gpio property to rate-select0-gpios > > Add the rate-select1-gpios property > > Add examples > > --- > > Documentation/devicetree/bindings/net/sff,sfp.txt | 74 +++++++++++++++++++++++ > > 1 file changed, 74 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/net/sff,sfp.txt > > > > diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt > > new file mode 100644 > > index 000000000000..1d9c786d6287 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/net/sff,sfp.txt > > @@ -0,0 +1,74 @@ > > +Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP) > > +Transceiver > > + > > +Required properties: > > + > > +- compatible : must be "sff,sfp" > > + > > +Optional Properties: > > + > > +- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial > > + interface > > + > > +- moddef0-gpios : phandle of the MOD-DEF0 (AKA Mod_ABS) module presence input > > + gpio signal > > Your example shows there's GPIO phandle *and* specifier. Would "GPIO specifier" be enough here? [...] > > +Example #2: Serdes to PHY to SFP connection > > + > > +sfp_eth0: sfp-eth0 { > > + compatible = "sff,sfp+"; > > + i2c-bus = <&sfpp0_i2c>; > > + los-gpio = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>; > > You describe "los-gpios" above , not "los-gpio" (which is a deprecated form). Will fix. baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@xxxxxxxxxx - tel: +972.52.368.4656, http://www.tkos.co.il - -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html