On Thu, Jul 06, 2017 at 02:29:36PM +0200, Nicolas Ferre wrote: > On 06/07/2017 at 10:35, Claudiu Beznea wrote: > > Hi all, > > > > This series adds support for sama5d2 SoM1 devices. > > > > The at91-sama5d27_som1.dtsi add specific bindings for SoM1 board. > > The at91-sama5d27_som1_ek.dts add specific bindings for SoM1 EK board. > > > > Thank you, > > Claudiu > > You can add my: > Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx> > > for the whole series. > (I remember that we also had Ludovic's one as well). Yes, the only comment was about the mac-offset but it has been removed from this series and I had the technical explanation so still Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx> > > Regards, > > > Changes in v3: > > - remove qspi flash mapping for the moment > > - remove at24 and i2c bindings; this will be introduced when > > "Add at24 functionality to read form different EEPROM offsets" patch will > > be accepted > > - change the title of patch 5 from this series from > > "ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support" to > > "ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support" to > > match the desired prefix > > > > Changes in v2: > > o in at91-sama5d27_som1.dtsi: > > - increase bootloader and kernel size in flash map (with bootloader > > flash offset the dtb and kernel flash offsets were changed) > > - use right pin for ethernet-phy interrupt > > > > o in at91-sama5d27_som1_ek.dts: > > - removed memory tag and rely on bootloader to fill the right value > > - use pin macros (from arch/arm/boot/dts/sama5d2-pinfunc.h) wherever > > posible instead of pin numbers > > - remove pinctrl_sensor_power and pinctrl_sensor_reset pin muxing > > since they are not of intereset for this board > > - use "pb4" label for user button instead of "bp1" > > > > Claudiu Beznea (2): > > ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support > > ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support > > > > Cristian Birsan (1): > > drivers: soc: atmel: Add basic support for new sama5d2 SiPs > > > > Cyrille Pitchen (1): > > ARM: dts: at91: sama5d2: add QSPI nodes > > > > Songjun Wu (1): > > ARM: dts: at91: sama5d2: add isc node > > > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 +++++++++ > > arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 551 ++++++++++++++++++++++++++++ > > arch/arm/boot/dts/sama5d2.dtsi | 38 ++ > > drivers/soc/atmel/soc.c | 8 + > > drivers/soc/atmel/soc.h | 4 + > > 6 files changed, 780 insertions(+) > > create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi > > create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts > > > > > -- > Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
