On 06/07/2017 at 11:35:24 +0300, Claudiu Beznea wrote: > Hi all, > > This series adds support for sama5d2 SoM1 devices. > > The at91-sama5d27_som1.dtsi add specific bindings for SoM1 board. > The at91-sama5d27_som1_ek.dts add specific bindings for SoM1 EK board. > > Thank you, > Claudiu > > Changes in v3: > - remove qspi flash mapping for the moment > - remove at24 and i2c bindings; this will be introduced when > "Add at24 functionality to read form different EEPROM offsets" patch will > be accepted > - change the title of patch 5 from this series from > "ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support" to > "ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support" to > match the desired prefix > > Changes in v2: > o in at91-sama5d27_som1.dtsi: > - increase bootloader and kernel size in flash map (with bootloader > flash offset the dtb and kernel flash offsets were changed) > - use right pin for ethernet-phy interrupt > > o in at91-sama5d27_som1_ek.dts: > - removed memory tag and rely on bootloader to fill the right value > - use pin macros (from arch/arm/boot/dts/sama5d2-pinfunc.h) wherever > posible instead of pin numbers > - remove pinctrl_sensor_power and pinctrl_sensor_reset pin muxing > since they are not of intereset for this board > - use "pb4" label for user button instead of "bp1" > > Claudiu Beznea (2): > ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support > ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support > > Cristian Birsan (1): > drivers: soc: atmel: Add basic support for new sama5d2 SiPs > > Cyrille Pitchen (1): > ARM: dts: at91: sama5d2: add QSPI nodes > > Songjun Wu (1): > ARM: dts: at91: sama5d2: add isc node > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 +++++++++ > arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 551 ++++++++++++++++++++++++++++ > arch/arm/boot/dts/sama5d2.dtsi | 38 ++ > drivers/soc/atmel/soc.c | 8 + > drivers/soc/atmel/soc.h | 4 + > 6 files changed, 780 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi > create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts > All applied, thanks! -- Alexandre Belloni, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
